Digilent Products: What They Are and How to Use Them
Digilent Expansion Modules / How-To Guides and Technical Workflows – Digilent Blog

Shields vs Pmods: Good vs Better?

Today we’re going to compare two different ways of increasing the functionality of a system board: Pmods and shields. Those of you have that have been following the Digilent Blog know that Pmods are Digilent’s series of peripheral modules with 6-12 pins that can easily be connected to appropriate pins on a system board to provide extra functionality and include audio amplifiers, GPS receivers, USB to UART interface, seven-segment displays, accelerometers, H-bridges with input feedback, analog-to-digital converters, and much more. For the rest of you who have been in this sector of the electronics industry, you know that shields are a type of board that you can plug directly on top of your microcontroller in a nice pin-to-pin fashion for expanded functionality. Although you might suspect which of these two items I prefer, we’ll check out the advantages of both of them.

Read More
Digilent Expansion Modules / Digilent Projects – Blog

Running 5+ Servos on a uC32…Can I Do It?

In the not too distant past, we made a couple of posts on Pmods that can help drive motors as well as a post on stepper motors. Today, we’re going to check out running multiple servo motors on a chipKIT board. Why would we want to do this? Well, aside from the nice feeling that comes from successfully doing some extreme multitasking, we’d also be able to run some super cool mechatronics projects, such as a robot arm!

Read More
FPGA Products: What They Are & How to Use Them - Digilent / How-To Guides and Technical Workflows – Digilent Blog

What Are Muxes and Demuxes?

A huge part of FPGA design is using logic blocks in design. With logic blocks, you can compartmentalize your design, rather than trying implement everything in one shot. Designing without smaller blocks would be like trying to design a car without subsystems like the braking system or engine. About half of the way through the course there is a project that covers a variety of basic logic blocks, including multiplexers (muxes) and demultiplexers (demuxes). So what are muxes and demuxes?

Read More
Digilent Expansion Modules / How-To Guides and Technical Workflows – Digilent Blog

How to Read a Datasheet

Here at Digilent we have a ton of products with a large amount of documentation and examples (like our Learn site and our Instructables page) letting you know how you can use our products. Within all of these, there are statements about what each product is (and is not) capable of in addition to the recommended operating condition. Some of you may be wondering, “How do we know these things?” Much of the information presented is determined from a datasheet. But where do we find this sort of information in the datasheet, or how do we even read a datasheet? Let’s find out.

Read More
FPGA Products: What They Are & How to Use Them - Digilent / How-To Guides and Technical Workflows – Digilent Blog

Computer Memory: Differences between the types of…(what was it again)… memory!

Computers have several difference ways of keeping track of the information that it is given. Most people in the world, which included myself until recently, might think there are only two kinds of memory: the “random access memory” (RAM) that computers have, and the flash memory that you can put on a thumb drive and carry around in your backpack without an issue. However, despite knowing that these two types of memory are not the whole picture, it was my personal experience that trying to learn more usually resulted in my eyes instantly glazing over; this is rather unhelpful in terms of actually learning something. Keeping this in mind, we’re going to do a broad overview of the different types of RAM, hopefully without the glazing over effect.

Read More
Digilent Expansion Modules

Digilent Pmods: Input Pmods – Tactile User Input

Today, we’re going to check out the last chunk of the input Pmods™ that Digilent offers. This set of inputs are slightly different than the inherent sensors that we saw last time. Although these Pmods are designed to give the system board information about the outside world, but this time you are their whole world. These tactile Pmods are designed so that they respond when you physically interact with them. It’s kinda like playing outside…in the comfort of your own home.

Read More
Digilent Expansion Modules

Digilent Pmods: Input Pmods – Sensors

It is time to check out another set of the Digilent Pmods! Last time, we looked at a subset of the input focused Pmods, the analog-to-digital converters. Today, we’re going to take a look at more of the input Pmods, most of which incorporate ADCs into their design structure. These ten peripheral modules are all inherent sensors, reporting the temperature, location, light level, or movement without the user needing to physically interact with them.

Read More
Digilent Software Solutions: What They Are & How to Use Them

Digilent WaveForms Software — What Is It and Who Should Use It?

On our website, WaveForms is described as a powerful suite of virtual instruments that brings analog and digital circuit design to your PC desktop. The instruments within WaveForms include an oscilloscope, logic analyzer, arbitrary waveform generator, digital pattern generator, power supplies, a voltmeter, virtual I/O devices, and a spectrum analyzer. Okay, so there’s a long list of fancy technical terms. But what makes WaveForms so special?

Read More