In this post, the hardware design for the Eclypse Z7 to perform wireless communication is discussed. The initial considerations behind the circuit design and PCB design have discussed in this …
Thermocouples are a popular way to measure temperature due to their low cost, ease-of-use, and wide measurement range. This article explains the difficulties in making accurate thermocouple measurements, how the …
At some point during a FPGA engineers’ career, they will be faced with a difficult bug in their VHDL or Verilog code and they’ll ask themselves: “Why are we stuck …
How to Test a Relay With a Multimeter: A Detailed Guide A multimeter tests a relay in two ways. First, set it to ohms (Ω) mode and measure the coil …
To measure current with a multimeter, you break the circuit and insert the meter in series. Set the meter to A (amps) or mA, plug the red probe into the …
There’s a particular kind of project that a lot of engineering students want to attempt but never quite start. Building a processor is high on that list. It sounds like …
Hello readers, Oscar Fonseca here, Product Manager at Emerson, working closely with our NI and Digilent academic customers. I’m excited to announce the release of LabVIEW WaveForms Toolkit 2.0. One …
