Building a Raspberry Pi-Based DAQ System for an SAE Baja Challenge Car The SAE Baja Challenge pushes engineering students far beyond the classroom. Teams are tasked with designing, building, and racing a …
The idea of “remote lab access” comes up a lot, but it can still feel a little abstract in practice. After dealing with the usual back-and-forth around lab access, the …
I’m not an engineer. But this will be my third time attending the ASEE Annual Conference with Digilent, and each year I leave feeling the same way: inspired. My background …
A large U.S. university with over 1,400 undergraduate electrical engineering students has developed a scalable approach to delivering hands-on lab experiences – both on campus and fully online. Serving a …
Signal processing starts with data. Whether you are working with sensors, audio signals, or transient events, the ability to capture clean, high-resolution data directly affects what you can learn from …
There are plenty of data acquisition devices under $400, and the best choice depends on what you’re measuring. For general-purpose analog input, the MCC USB-1208FS-Plus ($204) is the classroom-standard 12-bit, …
When Digilent announced LabVIEW WaveForms Toolkit 2.0 earlier this month, a few additions stood out. Pattern Generator and Logic Analyzer support give students access to more of their Analog Discovery …
Mixed-Signal Oscilloscope vs. Digital Storage Oscilloscope A mixed-signal oscilloscope, or MSO, combines the analog channels of a digital storage oscilloscope, or DSO, with digital logic-analyzer channels in one instrument. A …
Every FPGA development workflow depends on several connected pieces: a programming and debugging interface, a design environment, expansion hardware, and the accessories needed to connect and power the system. Many …
