Expand Your Acquisition Power Using Dual Mode: From the Forum
In a recent forum post, community member Denspa asked a great question: “Can I use two different Analog Discovery units together to increase the number of analog channels available for …
In a recent forum post, community member Denspa asked a great question: “Can I use two different Analog Discovery units together to increase the number of analog channels available for …
Are you looking for an intuitive and efficient way to teach or learn the fundamentals of digital electronics? The Digilent Digital Trainer Canvas for Analog Discovery Studio is the perfect …
Data rates on serial and parallel transmission lines are increasing rapidly. So are the data integrity issues developers face. Eye diagrams make their life easier. Higher data rates in telecommunications …
This post describes a senior design project that students at North Carolina State University (NCSU) worked on, in which the Analog Discovery 2 (AD2) is equipped with extra features tailored …
What is jitter? Jitter is the variance in where exactly a clock falls. You might expect that a 100 MHz clock has edges that occur exactly every 10 ns. However, …
So what is it? The Digilent Test & Measurement Toolbox allows users to acquire and analyze data in MATLAB using Digilent’s test and measurment devices. Featuring analog data streaming, digital …
So I’ve been using the Analog Discovery Pro (ADP3450/ADP3250) and the Analog Discovery 2 for some time now. But one of the things I had to keep on my bench here …
In this last installment of our four-part blog series about creating a smart lamp, we will bring everything together. The HAL for the WaveForms SDK we developed in the Part …
Editor’s Note – In this series, we will take a behind the scenes look at how an engineer tackles a project from beginning to end. What challenges will come up? …
Editor’s Note – In this series, we will take a behind the scenes look at how an engineer tackles a project from beginning to end. What challenges will come up? …
Editor’s Note – In this series, we will take a behind the scenes look at how an engineer tackles a project from beginning to end. What challenges will come up? …
Signal processing has come a long way from the days when early computers used processors consisting of bit-slice chips. Now, in the 21st century, the widespread use of integrated circuits …
Hardware engineers don’t always stay in the lab. Sometimes they work from home, or they need to test equipment that cannot be brought into the laboratory. In those situations, a …
Building a Raspberry Pi-Based DAQ System for an SAE Baja Challenge Car The SAE Baja Challenge pushes engineering students far beyond the classroom. Teams are tasked with designing, building, and racing a …
The idea of “remote lab access” comes up a lot, but it can still feel a little abstract in practice. After dealing with the usual back-and-forth around lab access, the …
I’m not an engineer. But this will be my third time attending the ASEE Annual Conference with Digilent, and each year I leave feeling the same way: inspired. My background …