There’s a particular kind of project that a lot of engineering students want to attempt but never quite start. Building a processor is high on that list. It sounds like …
Hello readers, Oscar Fonseca here, Product Manager at Emerson, working closely with our NI and Digilent academic customers. I’m excited to announce the release of LabVIEW WaveForms Toolkit 2.0. One …
At OTH Regensburg, Prof. Dr.-Ing. Heiko Unold has spent years finding new ways to connect engineering theory with hands-on experimentation. By integrating the Analog Discovery platform across multiple courses, he …
UMN Students Build a Rubidium Magneto-Optical Trap POSM students are gaining hands-on experience in optics, electronics, and precision measurement while building infrastructure for advanced photonics research. Building a rubidium magneto-optical …
Most students do not struggle with equations. They struggle with understanding what those equations actually do. In many learning environments, students define a system, run a process, and then interpret …
You open a Verilog example, launch Vivado for the first time, or start reading for a digital design course, and one term keeps showing up: RTL. It usually appears as …
At events like ASEE, there is a lot of conversation around tools, curriculum, and new ways to deliver technical content. All of those things matter. But one student poster I …
Building a Raspberry Pi-Based DAQ System for an SAE Baja Challenge Car The SAE Baja Challenge pushes engineering students far beyond the classroom. Teams are tasked with designing, building, and racing a …
The idea of “remote lab access” comes up a lot, but it can still feel a little abstract in practice. After dealing with the usual back-and-forth around lab access, the …
A large U.S. university with over 1,400 undergraduate electrical engineering students has developed a scalable approach to delivering hands-on lab experiences – both on campus and fully online. Serving a …
Howdy from Ft. Worth, Texas, where another NI Connect came to a fabulous end last week. Digilent was proud to share new tech, provide live demonstrations of our fan favorites, and generally …
Outfitting a lab is rarely about finding a single perfect instrument. In most cases, the goal is to choose tools that are flexible, reliable, and capable of supporting a range …
Running the same measurement 500 times, logging data overnight, or feeding captured samples directly into a Python analysis pipeline is where the WaveForms graphical application may start to fall short. …
A blown fuse is one of the easier electrical faults to track down. Whether you’re chasing a dead accessory in your car, reviving a silent audio amplifier, checking an appliance, …
How to Test a Relay With a Multimeter: A Detailed Guide A multimeter tests a relay in two ways. First, set it to ohms (Ω) mode and measure the coil …
To measure current with a multimeter, you break the circuit and insert the meter in series. Set the meter to A (amps) or mA, plug the red probe into the …
