Pmod OLEDrgb
Buy
Reference Manual
Technical Support
Pmod OLEDrgb
96 x 64 RGB OLED Display with 16-bit color
Features
- 96×64 pixel RGB OLED screen
- 0.8“ x 0.5” graphical display
- 16-bit color resolution
- Two low-power display shutdown modes
- 12-pin Pmod connector with SPI interface
Electrical
Bus
SPI
Specification Version
1.2.0
Logic Level
3.3V
Physical
Width
1.4 in (3.55 cm)
Length
1.0 in (2.54 cm)
J1 Pinout
Pin 1
CS
Pin 2
MOSI
Pin 3
NC
Pin 4
SCK
Pin 5
GND
Pin 6
VCC
Pin 7
D/C
Pin 8
RES
Pin 9
VCCEN
Pin 10
PMODEN
Pin 11
GND
Pin 12
VCC
The Digilent Pmod OLEDrgb (Revision B) is an organic RGB LED module with a 96×64 pixel display capable of 16-bit color resolution.
Example Projects
Microprocessor
- Programming the PmodOLEDrgb on the chipKIT Pro MX7 - Community Project
- Using the Pmod OLEDrgb with Arduino Uno - Application note
Programmable Logic
- Getting the PmodOLEDrgb to work on Zybo - Community project
-
- Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
Additional Resources
- Specification Version 1.2.0: PDF