Zmods

The Zmod™ family is Digilent's line of peripheral modules that conform to Opal Kelly's SYZYGY specification. Zmods are interface boards that offer modular high-speed I/O capabilities to compatible FPGA host boards.

Software Support

All Digilent Zmods are supported by custom controllers targeting 7-Series FPGA fabric, provided as IP for Xilinx's Vivado development environment. Check out the Zmods' resource centers, linked below, for more information.

Digilent provides software libraries for interacting with some Zmods, documented in the Zmod Base Library User Guide.


List of Zmods

Max Sample Rate Resolution Maximum Bandwidth Input Range Accuracy Input Impedence Signal Coupling Low Pass Filter

Zmod Scope
40 MS/s (1410-40)1)
105 MS/s (1410-105)2)
125 MS/s (1410-125)3)
40 MS/s (1210-40)4)
125 MS/s (1210-125)5)
40 MS/s (1010-40)6)
125 MS/s (1010-125)7)
14-bit (1410-40)
14-bit (1410-105)
14-bit (1410-125)
12-bit (1210-40)
12-bit (1210-125)
10-bit (1010-40)
10-bit (1010-125)
20 MHz (1410-40)
70 MHz (1410-105)
70 MHz (1410-125)
20 MHz (1210-40)
70 MHz (1210-125)
20 MHz (1010-40)
70 MHz (1010-125)
+/-1 V, +/-25 V +/-0.2% 1 MΩ || 18 pF AC/DC No

Zmod Digitizer
125 MS/s8) 14-bit 60+ MHz +/-1 V +/-0.5% 1 MΩ || 5 pF DC Only 60 MHz

Max Sample Rate Resolution Maximum Bandwidth

Zmod AWG
100 MS/s9) 14-bit 40 MHz

1), 2), 3), 4), 5), 6), 7), 9) Actual sample rate determined by clock source, provided by an FPGA host board through the SYZYGY connector
8) Actual sample rate determined by clock source, which is either the FPGA host board via the SYZYGY connector or a low-jitter onboard oscillator