A formal introduction to Waveforms 2015 and its extraordinary capabilities.
We all know that Instructables is a great site and project resource, but what about the ones we may not know about?
How to run custom commands on LINX.
Making things easier one circuit at a time with the Analog Discovery 2.
Welcome back to the Digilent Blog! If you’re new to Digilent, our community, or even FPGAs or coding in general then you’re in for a treat. I have recently started …
As you may be aware if you follow the blog closely, I’ve been working on building the claw machine. The claw machine is one of those infuriating devices that camps in …
Use a Basys 3 and PmodJSTK to control a stepper motor.
Now we know what a state machine is. But how do we code one?
Oftentimes when we are creating electronics projects, we are trying to emulate or create a series of events. Most of the time the order of events we want to happen, …
Learn about the differences between combinational and sequential logic here!
What’s the best way to prototype a project?
Do you feel your creativity lagging? Quinn provides some good tips for recharging and renewing your passion for making.
The idea of “remote lab access” comes up a lot, but it can still feel a little abstract in practice. After dealing with the usual back-and-forth around lab access, the …
I’m not an engineer. But this will be my third time attending the ASEE Annual Conference with Digilent, and each year I leave feeling the same way: inspired. My background …
A large U.S. university with over 1,400 undergraduate electrical engineering students has developed a scalable approach to delivering hands-on lab experiences – both on campus and fully online. Serving a …
Signal processing starts with data. Whether you are working with sensors, audio signals, or transient events, the ability to capture clean, high-resolution data directly affects what you can learn from …
