3.3.3 Change Log
Added
- Logic
- Protocol specific and advanced trigger, pulse length, counter, deserializer
- Start interpreter from here menu, useful for UART
- UART Auto Arbitrary/Standard baud rate options
- Position scroll bar
- Patterns
- Prefill binary counter
- Sample table
- Direction for binary, Gray and Johnson counter
- Logic and Scope
- Trigger position and noise for record mode
- Save acquisition as tab
- Logic and Patterns
- Save/load row/column size
- Network
- Custom plots examples for series/parallel capacitor/inductor/D/Q approximations
- Wavegen
- Analog Discovery 2 power supplies can be used as Wavegen channel 3 and 4, with 6th device configuration
- General:
- Labels for plots
- EExplorer configuration with 0.5V logic input threshold
- Insert panel for scripts in scope custom math, custom measurement, wavegen editor, logger channel
- Application language/translation support
- Animations for visible waveform transitions
- Smooth curved waveforms option
- Cursor view show option for each column
- Script tool plots
- Import WAV file for all platforms
Changed
- Using Qt 5.6 for OS X and Windows
- Scope and Logic trigger position limit increased to 24hours at 100MHz, 31 to 43 bit device counter
- Logic:
- UART Stop length shorter with half bit
- Logic and Patterns
- Context menu split in two
- Insert signal, bus, protocol
- Event filter match option
- Logic and Scope
- Stream mode renamed to Record
- Acquisitions (buffers) stored in memory, less HDD operations
- Auto rearming for next acquisition and disable scope noise to reduce latency
- Demo mode for Scope uses Wavegen channels
- Scope measurement performance
Fixed
- Network cursor value accuracy
- Scope
- Measurement show option activation
- Measurement units
- Fixed low/high measurement algorithm which influences horizontal measurements
- Audio output device selection
- Logic noise was not visible in some cases
- Wavegen
- Custom and play data override issue in projects
- 10ns longer run with repeat trigger
- OS X driver install launcher
Known Issues
- Scope calibration works only with “no limits” option, press Alt+F11 in main window
- Logic analyzer trigger menu is not working, but trigger is selectable is signal row