Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
programmable-logic:usb104a7:zmoddac [2021/05/17 22:29] – [Hardware Setup] Alex Wongprogrammable-logic:usb104a7:zmoddac [2022/09/12 19:33] (current) – changed forum.digilentinc.com to forum.digilent.com Jeffrey
Line 37: Line 37:
  
 ===Hardware=== ===Hardware===
-  * [[https://store.digilentinc.com/usb104a7/|USB104A7]]+  * [[start|USB104A7]]
     * Including a **USB A cable** and **5V Power Supply**     * Including a **USB A cable** and **5V Power Supply**
     * NOTE: SW1 DDR voltage set to 1.5V     * NOTE: SW1 DDR voltage set to 1.5V
-  * [[https://store.digilentinc.com/zmod-dac-1411-syzygy-compatible-dual-channel-14-bit-digital-to-analog-converter-module/|Zmod AWG 1411]] +  * [[https://digilent.com/shop/zmod-awg-1411-2-channel-14-bit-arbitrary-waveform-generator-awg-module/|Zmod AWG 1411]] 
-  * [[https://store.digilentinc.com/analog-discovery-2-100msps-usb-oscilloscope-logic-analyzer-and-variable-power-supply/|Analog Discovery 2 (AD2)]]+  * [[https://digilent.com/shop/analog-discovery-2-100ms-s-usb-oscilloscope-logic-analyzer-and-variable-power-supply/|Analog Discovery 2 (AD2)]]
     * Including a **Micro USB cable**     * Including a **Micro USB cable**
-  * [[https://store.digilentinc.com/sma-to-alligator-clip-cable/|SMA to Alligator Clip Cable]]+  * [[https://digilent.com/shop/sma-to-alligator-clip-cable/|SMA to Alligator Clip Cable]]
  
 ===Software=== ===Software===
   * **Vivado Design Suite 2019.1** with **Digilent Board Support Files** installed   * **Vivado Design Suite 2019.1** with **Digilent Board Support Files** installed
     * Follow the [[vivado:installing-vivado:start]] guide on how to install Vivado and Digilent Board Support Files.     * Follow the [[vivado:installing-vivado:start]] guide on how to install Vivado and Digilent Board Support Files.
-  * [[https://reference.digilentinc.com/reference/software/waveforms/waveforms-3/start|Waveforms Software]] +  * [[software/waveforms/waveforms-3/start|Waveforms Software]] 
-  * [[https://reference.digilentinc.com/reference/software/adept/start|Digilent Adept Runtime 2.20 or later installed]]+  * [[software/adept/start|Digilent Adept Runtime 2.20 or later installed]]
   * [[https://ttssh2.osdn.jp/index.html.en|Tera Term (Optional)]]   * [[https://ttssh2.osdn.jp/index.html.en|Tera Term (Optional)]]
-    * Used to read debug messages from the FPGA. Follow the [[[[learn:programmable-logic:tutorials:tera-term|Serial Terminal Emulator Guide]] for more information on installing and using Tera Term.+    * Used to read debug messages from the FPGA. Follow the [[programmable-logic:guides:serial-terminals:start|Serial Terminal Emulator Guide]] for more information on installing and using Tera Term.
  
 ===Skills=== ===Skills===
   * **Basic familiarity with Vivado**   * **Basic familiarity with Vivado**
-    *  //This experience can be found by walking through our "[[https://reference.digilentinc.com/vivado/getting_started/2018.2|Getting Started with Vivado]]" guide//+    *  //This experience can be found by walking through our "[[vivado/getting_started/2018.2|Getting Started with Vivado]]" guide//
   * **Basic familiarity with Digilent Waveforms**   * **Basic familiarity with Digilent Waveforms**
  
Line 120: Line 120:
 {{ :reference:programmable-logic:usb104a7:writewave.png?direct&600 |}} {{ :reference:programmable-logic:usb104a7:writewave.png?direct&600 |}}
  
-3. Type "start" to start the output on the ZmodDAC.+3. Type "start" to start the output on the Zmod AWG 1411.
  
 4. In the Waveforms application, click **Welcome>Scope**. 4. In the Waveforms application, click **Welcome>Scope**.
  
-5. Click **Run** to capture input from +1 and -1. Disable Channel 2 as it is not connected. You may need to zoom in and adjust the trigger to see the ZmodDAC output clearly.+5. Click **Run** to capture input from +1 and -1. Disable Channel 2 as it is not connected. You may need to zoom in and adjust the trigger to see the Zmod AWG 1411 output clearly.
 {{ :reference:programmable-logic:usb104a7:waveformcapture.png?direct&600 |}} {{ :reference:programmable-logic:usb104a7:waveformcapture.png?direct&600 |}}
  
Line 132: Line 132:
 For more guides and example projects for your USB104A7, please visit its [[programmable-logic:usb104a7:start|Resource Center]]. For more guides and example projects for your USB104A7, please visit its [[programmable-logic:usb104a7:start|Resource Center]].
  
-For more information about how to use the other Digilent products featured in this demo, please visit their respective Resource Centers: \\ [[test-and-measurement:analog-discovery-2:start]], [[zmod:zmoddac:start]].+For more information about how to use the other Digilent products featured in this demo, please visit their respective Resource Centers: \\ [[test-and-measurement:analog-discovery-2:start]], [[zmod:awg:start]].
  
-For technical support, please visit the [[https://forum.digilentinc.com|Digilent Forums]].+For technical support, please visit the [[https://forum.digilent.com|Digilent Forums]].
  
-{{tag>learn programmable-logic project usb104a7 zmoddac}}+{{tag>learn programmable-logic project usb104a7 zmoddac zmodawg1411}}