Differences

This shows you the differences between two versions of the page.

Link to this comparison view

pmod:pmodtof:reference-manual [2021/05/14 23:05] – ↷ Links adapted because of a move operation Arthur Brownpmod:pmodtof:reference-manual [2023/02/08 20:34] (current) – external edit 127.0.0.1
Line 44: Line 44:
  
  
-All the registers used in the measurement and/or calibration process are described in the ISL29501 [[https://www.renesas.com/eu/en/www/doc/datasheet/isl29501.pdf|ISL29501 datasheet]]. +All the registers used in the measurement and/or calibration process are described in the [[https://www.renesas.com/eu/en/www/doc/datasheet/isl29501.pdf|ISL29501 datasheet]]. 
  
-There is a set of registers used at every chip initialization. The Chip Initialization routine is described in [[https://www.renesas.com/us/en/www/doc/application-note/an1724.pdf?_ga=2.225173722.1727551698.1569238908-634851053.1552119990|ISL29501 Firmware Routines (an1724.pdf) documentation]].\\ +There is a set of registers used at every chip initialization. /* The Chip Initialization routine is described in [[https://www.renesas.com/us/en/www/doc/application-note/an1724.pdf?_ga=2.225173722.1727551698.1569238908-634851053.1552119990|ISL29501 Firmware Routines (an1724.pdf) documentation]]. */ 
-These values (see table below) are set by Digilent and the user must be very careful changing them. In this situation the user must modify these values before performing manual calibration.\\ + 
-Please read [[https://www.renesas.com/in/en/www/doc/datasheet/isl29501.pdf?_ga=2.219327705.1727551698.1569238908-634851053.1552119990|ISL29501]] documentation before proceeding.\\+These values (see table below) are set by Digilent and the user must be very careful changing them. In this situation the user must modify these values before performing manual calibration. 
 + 
 +Please read [[https://www.renesas.com/us/en/document/dst/isl29501-datasheet?language=en|ISL29501]] documentation before proceeding.\\
  
 For more information, consult the [[pmod:pmodtof:zynqlibraryuserguide#isl29501_-_time_of_flight_tof_integrated_circuit|Pmod ToF Library user guide]].\\ For more information, consult the [[pmod:pmodtof:zynqlibraryuserguide#isl29501_-_time_of_flight_tof_integrated_circuit|Pmod ToF Library user guide]].\\
Line 146: Line 148:
 The pins on the pin header are spaced 100 mil apart. The PCB is 1.6 inches long on the sides parallel to the pins on the pin header and 0.8 inches long on the sides perpendicular to the pin header. The pins on the pin header are spaced 100 mil apart. The PCB is 1.6 inches long on the sides parallel to the pins on the pin header and 0.8 inches long on the sides perpendicular to the pin header.
  
-====== Software Libraries======+===== Software Libraries=====
  
 Digilent provides a Library to access Pmod ToF functionality with Digilent FPGA development boards. The Library can be found in the [[https://github.com/Digilent/vivado-hierarchies|Vivado Hierarchies]] GitHub repository. Digilent provides a Library to access Pmod ToF functionality with Digilent FPGA development boards. The Library can be found in the [[https://github.com/Digilent/vivado-hierarchies|Vivado Hierarchies]] GitHub repository.
Line 158: Line 160:
  
  
-====== Additional Information ====== +===== Additional Information ===== 
-The schematics of the %%Pmod ToF%% are available {{:reference:pmod:pmodtof:pmodtof_sch.pdf |here}}. Additional information about the Intersil distance sensor, including communication modes and specific timings of the chip can be found in the "Documentation" area of the ISL29501 product page, found [[https://www.renesas.com/eu/en/products/sensors/proximity-sensors/light-to-digital-sensors/device/ISL29501.html#documents|here]].+The schematics of the %%Pmod ToF%% are available {{:reference:pmod:pmodtof:pmodtof_sch.pdf |here}}. Additional information about the Intersil distance sensor, including communication modes and specific timings of the chip can be found in the "Documentation" area of the ISL29501 product page, found [[https://www.renesas.com/eu/en/products/sensor-products/light-proximity-sensors/proximity-sensors/isl29501-time-flight-tof-signal-processing-ic#document|here]].
  
 Example code and more information on how to use the Pmod ToF can be found on its [[pmod:pmodtof:start|Resource Center]].   Example code and more information on how to use the Pmod ToF can be found on its [[pmod:pmodtof:start|Resource Center]].  
  
-If you have any questions or comments about the %%Pmod ToF%%, feel free to post them under the Add-on Boards section of the [[https://forum.digilentinc.com/forum/7-add-on-boards/|Digilent Forum]].+If you have any questions or comments about the %%Pmod ToF%%, feel free to post them under the Add-on Boards section of the [[https://forum.digilent.com/forum/7-add-on-boards/|Digilent Forum]].
  
 {{tag>pmod pmodtof distance reference-manual doc }} {{tag>pmod pmodtof distance reference-manual doc }}