This is an old revision of the document!


Pmod TMP2

Buy Reference Manual Technical Support
Pmod TMP2
Temperature Sensor
Features
  • 16-bit ambient temperature sensor
  • Typical accuracy better that 0.25º C
  • 240 ms continuous conversion time
  • Programmable over and under-temperature control pins
  • No calibration required
  • 2×4-pin connector with I2C interface
Electrical
Bus
Specification Version
1.0
Logic Level
3.3V
Physical
Width
1.0 in (2.54 cm)
Length
0.80 in (2.03 cm)
Design Resources
Fritzing Part
Documentation
Primary IC
Reference Manual
Schematic
J1 Pinout
Pin 1 & 5
SCL
Pin 2 & 6
SDA
Pin 3 & 7
GND
Pin 4 & 8
VCC

The Digilent Pmod TMP2 (Revision B) is a temperature module allowing users to detect ambient temperatures ranging from -40 °C to 150 °C.



Example Projects

  • Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
Microprocessor
Programmable Logic

Additional Resources