Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
ni:mxp_high_current_adapter [2015/06/03 15:39] – Lucian Dale | ni:mxp_high_current_adapter [2023/12/04 20:11] (current) – [External Links] Martha | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== High Current Adapter | + | ====== High Current Adapter |
- | {{: | + | {{ : |
- | **Overview** | + | <WRAP center round important 60%> |
+ | The High Current Adapter for NI myRIO is retired and no longer for sale in our store. | ||
+ | </ | ||
- | The High Current Adapter for NI myRIO allows you drive high power low speed currents using relays and open drain N-FET otputs trough MXP connector on your myRIO. The switched signals are connected with screw terminals. For open drains a power supply is needed. | + | **Welcome to the resource center for the High Current Adapter for NI myRIO!** |
- | Key Features: | + | Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down. |
- | * Supports 3V...16V power voltage(external power supply required) | + | With the High Current Adapter, you can use your NI myRIO to interact with high current |
- | * 4 Open drain outputs | + | (For motor applications, please see the [[ni:mxp_motor_adapter|myRIO Motor Adapter Board]]) |
- | *Continuous | + | |
- | * Peak output current: | + | |
- | * 4 Standard 3 terminal relay outputs | + | |
- | * Common, Normally Closed, Normally Open | + | |
- | * Relay output max switching voltage:30V | + | |
- | * Rated current: | + | |
- | * 34-pin female breakout allowing direct access to signal pins | + | |
- | * Uses the myRIO Expansion Port(MXP) connector | + | |
- | **Connector Pin-outs** | + | The High Current Adapter is able to run applications from 3V-16V and can deliver current up to 4A, providing users with a way to plug their applications in directly without any additional electronics required. |
- | __Relay connectors__ : | ||
- | ^ Signal ^ Description ^ | ||
- | | NOx | Normal Open | | ||
- | | NCx | Normal Close | | ||
- | | COMx | Common terminal | | ||
- | __Open Drains__ : | ||
- | ^ Signal ^ Description ^ | ||
- | | ODx- | Open Drain negative terminal | | ||
- | | ODx+ , PWR+ | Supply voltage (internally connected) | | ||
- | | PWR- | Ground | | ||
+ | ---- | ||
+ | ===== Documentation ===== | ||
+ | |||
+ | * **Schematic** -- {{: | ||
+ | * **Reference Manual** -- [[ni: | ||
+ | * Technical description of the High Current Adapter and all of its features. | ||
+ | * **Sell Sheet** -- Sell Sheet is currently unavailable, | ||
+ | * **Fritzing Part** | ||
+ | *{{high_current_adapter.fzpz|FZPZ - rev 1}} | ||
+ | * The Fritzing part that can be uploaded and used to create circuit images. | ||
+ | |||
+ | ---- | ||
+ | |||
+ | ===== External Links ===== | ||
+ | * [[https:// | ||
+ | * [[http:// | ||
+ | |||
+ | {{tag> |