Digital Projects

This coursework will work you through the first steps of working with an FPGA board while learning Digital design. It is intended for hands-on learners working with Digilent's Basys 3 or Nexys A7 FPGA development boards.

If you are brand new to the Vivado tools, you can check out our Installing Vivado, Vitis, and Digilent Board Files and Getting Started with Vivado for Hardware-Only Designs guides for a cursory introduction to installation and programming your board for the first time.

• Project 1: Use Switches to Control LEDs
• Project 2: Guess the Logic
• Project 3: Majority of Five
• Project 4: Multiplexer, Decoder, Encoder, and Shifter
• Project 5: A Simple Communications System
• Project 6: Simulate Glitch and Delay in Combinational Circuits
• Project 7: Simulate an SR-Latch
• Project 8: Blinking LEDs and a Clock Divider
• Project 9: Comparator, Adder, Multiplier, and ALU
• Project 10: Counter and Clock Divider Revisit
• Project 11: Building a Serial Adder Using a State Machine

Coming Soon!