Controlling the USB-ERB08 Using ULx for NI LabVIEW

A certain example that gets installed with ULx can be used with the USB-ERB08 without any wiring diagram changes. See picture. Start with the example named ULx Write Dig Chan.vi, as installed by ULx 2.0, and change only the channel list (top left box on front panel) by browsing and grabbing all of the 8 channels on your USB-ERB08 board. Note that the 8 channel numbers on a USB-ERB08 (as interpreted by the software) are PortCLow bits 0-3 and PortCHigh bits 0-3.