Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
test-and-measurement:guides:waveforms-static-io [2021/05/14 23:05] – ↷ Page moved from reference:test-and-measurement:guides:waveforms-static-io to test-and-measurement:guides:waveforms-static-io Arthur Browntest-and-measurement:guides:waveforms-static-io [2024/02/29 14:17] (current) – [Using the Static I/O] replaced image Fausto Soares
Line 3: Line 3:
 ~~TechArticle~~ ~~TechArticle~~
  
-{{reference:test-and-measurement:analog-discovery-studio:hardware-reference-manual:static-io.png?nolink&800}}+{{test-and-measurement:analog-discovery-pro-2230:static-io-screenshot.png?nolink|}} 
  
 ===== Introduction ===== ===== Introduction =====
Line 10: Line 10:
 ===== Prerequisites ===== ===== Prerequisites =====
   * A Digilent Test & Measurement Device with Digital Output Channels:   * A Digilent Test & Measurement Device with Digital Output Channels:
-    * [[reference:test-and-measurement:analog-discovery-pro-3x50:start|Analog Discovery Pro (ADP3450/ADP3250)]] +    * [[test-and-measurement:analog-discovery-3:start|Analog Discovery 3]] 
-    * [[reference:test-and-measurement:analog-discovery-studio:start|Analog Discovery Studio]] +    * [[test-and-measurement:analog-discovery-pro-5250:start|Analog Discovery Pro (ADP5250)]] 
-    * [[reference:test-and-measurement:digital-discovery:start|Digital Discovery]] +    * [[test-and-measurement:analog-discovery-pro-3x50:start|Analog Discovery Pro (ADP3450/ADP3250)]] 
-    * [[reference:test-and-measurement:analog-discovery-2:start|Analog Discovery 2]] +    * [[test-and-measurement:analog-discovery-pro-2230:start|Analog Discovery Pro (ADP2230)]] 
-    * [[reference:test-and-measurement:analog-discovery:start|Analog Discovery (Legacy)]]+    * [[test-and-measurement:analog-discovery-studio:start|Analog Discovery Studio]] 
 +    * [[test-and-measurement:digital-discovery:start|Digital Discovery]] 
 +    * [[test-and-measurement:analog-discovery-2:start|Analog Discovery 2]] 
 +    * [[test-and-measurement:analog-discovery:start|Analog Discovery (Legacy)]]
   * A Computer with WaveForms Software Installed   * A Computer with WaveForms Software Installed
  
Line 233: Line 236:
 ---- ----
 ==== Note: Using Multiple Instruments ==== ==== Note: Using Multiple Instruments ====
-The //StaticIO// instrument can be used with other WaveForms instruments. Using multiple instruments at the same time is helpful in a wide variety of situations. One example would be to use the //Protocol Analyzer// to configure a device under test, the //StaticIO//, the //Pattern Generator// or the //Protocol Analyzer// to stimulate the device, and capturing the result in the //Logic Analyzer//, all at the same time. More information on how instruments can be operated together can be found in the [[reference:test-and-measurement:guides:waveforms-cross-triggers]] guide.+The //StaticIO// instrument can be used with other WaveForms instruments. Using multiple instruments at the same time is helpful in a wide variety of situations. One example would be to use the //Protocol Analyzer// to configure a device under test, the //StaticIO//, the //Pattern Generator// or the //Protocol Analyzer// to stimulate the device, and capturing the result in the //Logic Analyzer//, all at the same time. More information on how instruments can be operated together can be found in the [[test-and-measurement:guides:waveforms-cross-triggers]] guide.
  
 It should be noted that while multiple instruments can use any Digital Input pin, and those pins can be used as Digital Outputs, no more than one instrument can control a Digital Output pin at a time. WaveForms accounts for this by disabling instruments using a shared output, or by displaying a message stating that a shared output is currently used by a different instrument. It should be noted that while multiple instruments can use any Digital Input pin, and those pins can be used as Digital Outputs, no more than one instrument can control a Digital Output pin at a time. WaveForms accounts for this by disabling instruments using a shared output, or by displaying a message stating that a shared output is currently used by a different instrument.
Line 375: Line 378:
 ==== Next Steps ==== ==== Next Steps ====
  
-For more guides on how to use the Digilent Test & Measurement Device, return to the device's Resource Center, linked from the [[reference:test-and-measurement:start]] page of this wiki.+For more guides on how to use the Digilent Test & Measurement Device, return to the device's Resource Center, linked from the [[test-and-measurement:start]] page of this wiki.
  
-For more information on WaveForms visit the [[reference:software:waveforms:waveforms-3:reference-manual|WaveForms Reference Manual]]. +For more information on WaveForms visit the [[software:waveforms:waveforms-3:reference-manual|WaveForms Reference Manual]]. 
  
-For technical support, please visit the [[https://forum.digilentinc.com/forum/8-scopes-instruments/|Scopes and Instruments]] section of the Digilent Forums.+For technical support, please visit the [[https://forum.digilent.com/forum/8-test-and-measurement/|Test and Measurement]] section of the Digilent Forums.
  
 {{tag>tutorial analog-discovery-studio}} {{tag>tutorial analog-discovery-studio}}