Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
test-and-measurement:analog-discovery-pro-3x50:ethernet-streaming [2023/10/18 19:24] Alyssa Holzertest-and-measurement:analog-discovery-pro-3x50:ethernet-streaming [2024/03/04 20:05] (current) James Colvin
Line 24: Line 24:
 Connecting to a network via a router gives the ADP3450/ADP3250 the ability to connect out to the wider internet in Linux mode. It also allows the device to take advantage of DHCP and avoid you needing to manually select IP addresses for both the host and the device. However, the network latency may be higher and the achievable data transfer rate may be lower, depending on the network configuration. This can limit the amount of data that can be provided to WaveForms and may lower the effective sample rate of the system. You may also need to use the router connection if your computer doesn't have a free network interface that can be dedicated to the Analog Discovery Pro. Connecting to a network via a router gives the ADP3450/ADP3250 the ability to connect out to the wider internet in Linux mode. It also allows the device to take advantage of DHCP and avoid you needing to manually select IP addresses for both the host and the device. However, the network latency may be higher and the achievable data transfer rate may be lower, depending on the network configuration. This can limit the amount of data that can be provided to WaveForms and may lower the effective sample rate of the system. You may also need to use the router connection if your computer doesn't have a free network interface that can be dedicated to the Analog Discovery Pro.
  
-It should be noted that if you are connecting the Analog Discovery Pro to the network, then anyone on that network can connect to it through WaveForms.+It should be noted that if you are connecting the Analog Discovery Pro to the network, then anyone on that network can connect to it through WaveForms, unless you set up [[test-and-measurement/analog-discovery-pro-3x50/authentication|Authentication]]. 
 <newcolumn> <newcolumn>
 {{ reference:test-and-measurement:analog-discovery-pro-3x50:ethernetandusb.jpg?400 |}} {{ reference:test-and-measurement:analog-discovery-pro-3x50:ethernetandusb.jpg?400 |}}