Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
test-and-measurement:analog-discovery-pro-3x50:connect-to-the-internet [2022/11/18 19:41] – [Setting up the Connection] table width on username/pwd Arthur Browntest-and-measurement:analog-discovery-pro-3x50:connect-to-the-internet [2023/10/18 19:25] (current) – Alyssa Holzer
Line 8: Line 8:
   * Analog Discovery Pro in Linux mode   * Analog Discovery Pro in Linux mode
     * If you haven't used Linux mode before, check out the [[linux-mode|Getting Started in Linux Mode]] guide for information on how to switch from the default Standard mode into Linux mode, boot into Linux, and connect to it with a serial terminal.     * If you haven't used Linux mode before, check out the [[linux-mode|Getting Started in Linux Mode]] guide for information on how to switch from the default Standard mode into Linux mode, boot into Linux, and connect to it with a serial terminal.
-  * A computer with [[https://mautic.digilentinc.com/waveforms-download|WaveForms]] installed, version 3.16.3 or later+  * A computer with [[https://cloud.digilent.com/myproducts/waveform?pc=1&tab=2|WaveForms]] installed, version 3.16.3 or later
   * USB cable   * USB cable
   * Ethernet cable or a USB WiFi Dongle (see the [[test-and-measurement:analog-discovery-pro-3x50:specifications#compatible_wi-fi_chipsets|Specifications]] for a list of compatible dongles)   * Ethernet cable or a USB WiFi Dongle (see the [[test-and-measurement:analog-discovery-pro-3x50:specifications#compatible_wi-fi_chipsets|Specifications]] for a list of compatible dongles)