Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
programmable-logic:usb104a7:zmoddac [2021/05/17 22:29] – [Hardware Setup] Alex Wongprogrammable-logic:usb104a7:zmoddac [2021/11/11 22:10] – ↷ Links adapted because of a move operation Arthur Brown
Line 37: Line 37:
  
 ===Hardware=== ===Hardware===
-  * [[https://store.digilentinc.com/usb104a7/|USB104A7]]+  * [[start|USB104A7]]
     * Including a **USB A cable** and **5V Power Supply**     * Including a **USB A cable** and **5V Power Supply**
     * NOTE: SW1 DDR voltage set to 1.5V     * NOTE: SW1 DDR voltage set to 1.5V
-  * [[https://store.digilentinc.com/zmod-dac-1411-syzygy-compatible-dual-channel-14-bit-digital-to-analog-converter-module/|Zmod AWG 1411]] +  * [[https://digilent.com/shop/zmod-awg-1411-2-channel-14-bit-arbitrary-waveform-generator-awg-module/|Zmod AWG 1411]] 
-  * [[https://store.digilentinc.com/analog-discovery-2-100msps-usb-oscilloscope-logic-analyzer-and-variable-power-supply/|Analog Discovery 2 (AD2)]]+  * [[https://digilent.com/shop/analog-discovery-2-100ms-s-usb-oscilloscope-logic-analyzer-and-variable-power-supply/|Analog Discovery 2 (AD2)]]
     * Including a **Micro USB cable**     * Including a **Micro USB cable**
-  * [[https://store.digilentinc.com/sma-to-alligator-clip-cable/|SMA to Alligator Clip Cable]]+  * [[https://digilent.com/shop/sma-to-alligator-clip-cable/|SMA to Alligator Clip Cable]]
  
 ===Software=== ===Software===
   * **Vivado Design Suite 2019.1** with **Digilent Board Support Files** installed   * **Vivado Design Suite 2019.1** with **Digilent Board Support Files** installed
     * Follow the [[vivado:installing-vivado:start]] guide on how to install Vivado and Digilent Board Support Files.     * Follow the [[vivado:installing-vivado:start]] guide on how to install Vivado and Digilent Board Support Files.
-  * [[https://reference.digilentinc.com/reference/software/waveforms/waveforms-3/start|Waveforms Software]] +  * [[software/waveforms/waveforms-3/start|Waveforms Software]] 
-  * [[https://reference.digilentinc.com/reference/software/adept/start|Digilent Adept Runtime 2.20 or later installed]]+  * [[software/adept/start|Digilent Adept Runtime 2.20 or later installed]]
   * [[https://ttssh2.osdn.jp/index.html.en|Tera Term (Optional)]]   * [[https://ttssh2.osdn.jp/index.html.en|Tera Term (Optional)]]
-    * Used to read debug messages from the FPGA. Follow the [[[[learn:programmable-logic:tutorials:tera-term|Serial Terminal Emulator Guide]] for more information on installing and using Tera Term.+    * Used to read debug messages from the FPGA. Follow the [[programmable-logic:guides:serial-terminals:start|Serial Terminal Emulator Guide]] for more information on installing and using Tera Term.
  
 ===Skills=== ===Skills===
   * **Basic familiarity with Vivado**   * **Basic familiarity with Vivado**
-    *  //This experience can be found by walking through our "[[https://reference.digilentinc.com/vivado/getting_started/2018.2|Getting Started with Vivado]]" guide//+    *  //This experience can be found by walking through our "[[vivado/getting_started/2018.2|Getting Started with Vivado]]" guide//
   * **Basic familiarity with Digilent Waveforms**   * **Basic familiarity with Digilent Waveforms**
  
Line 120: Line 120:
 {{ :reference:programmable-logic:usb104a7:writewave.png?direct&600 |}} {{ :reference:programmable-logic:usb104a7:writewave.png?direct&600 |}}
  
-3. Type "start" to start the output on the ZmodDAC.+3. Type "start" to start the output on the Zmod AWG 1411.
  
 4. In the Waveforms application, click **Welcome>Scope**. 4. In the Waveforms application, click **Welcome>Scope**.
  
-5. Click **Run** to capture input from +1 and -1. Disable Channel 2 as it is not connected. You may need to zoom in and adjust the trigger to see the ZmodDAC output clearly.+5. Click **Run** to capture input from +1 and -1. Disable Channel 2 as it is not connected. You may need to zoom in and adjust the trigger to see the Zmod AWG 1411 output clearly.
 {{ :reference:programmable-logic:usb104a7:waveformcapture.png?direct&600 |}} {{ :reference:programmable-logic:usb104a7:waveformcapture.png?direct&600 |}}
  
Line 132: Line 132:
 For more guides and example projects for your USB104A7, please visit its [[programmable-logic:usb104a7:start|Resource Center]]. For more guides and example projects for your USB104A7, please visit its [[programmable-logic:usb104a7:start|Resource Center]].
  
-For more information about how to use the other Digilent products featured in this demo, please visit their respective Resource Centers: \\ [[test-and-measurement:analog-discovery-2:start]], [[zmod:zmoddac:start]].+For more information about how to use the other Digilent products featured in this demo, please visit their respective Resource Centers: \\ [[test-and-measurement:analog-discovery-2:start]], [[zmod:awg:start]].
  
 For technical support, please visit the [[https://forum.digilentinc.com|Digilent Forums]]. For technical support, please visit the [[https://forum.digilentinc.com|Digilent Forums]].
  
-{{tag>learn programmable-logic project usb104a7 zmoddac}}+{{tag>learn programmable-logic project usb104a7 zmoddac zmodawg1411}}