Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
programmable-logic:guides:getting-started-with-pmod-ips [2021/05/14 23:06] – ↷ Links adapted because of a move operation Arthur Brownprogrammable-logic:guides:getting-started-with-pmod-ips [2021/08/26 21:32] (current) – ↷ Links adapted because of a move operation Arthur Brown
Line 16: Line 16:
     * USB Programming cables, USB UART cables, and Power Supply, as required by the board.     * USB Programming cables, USB UART cables, and Power Supply, as required by the board.
   * Vivado and Vitis installations   * Vivado and Vitis installations
-    * See [[programmable-logic:guides:installation]] for instructions on how to install these tools.+    * See [[programmable-logic:guides:installing-vivado-and-vitis]] for instructions on how to install these tools.
   * One or more supported Digilent Pmods   * One or more supported Digilent Pmods
     * See the [[programmable-logic:guides:pmod-requirements]] tables for more information on which Pmods are supported by a Pmod IP core. Keeping this page open in another tab while following this guide is recommended, as additional design requirements of your Pmod/s are included.     * See the [[programmable-logic:guides:pmod-requirements]] tables for more information on which Pmods are supported by a Pmod IP core. Keeping this page open in another tab while following this guide is recommended, as additional design requirements of your Pmod/s are included.