Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
reference:programmable-logic:cmod-s6:start [2021/01/21 23:44] – Arthur Brownprogrammable-logic:cmod-s6:start [2022/09/12 18:24] – changed forum.digilentinc.com to forum.digilent.com Jeffrey
Line 1: Line 1:
-~~NOTOC~~  
-     
-====== Cmod S6 ====== 
-{{Digilent Infobox 
-| Store Page = http://store.digilentinc.com/cmod-s6-breadboardable-spartan-6-fpga-module/ 
-| Manual = [[reference-manual]] 
-| Support = https://forum.digilentinc.com/forum/4-fpga/ 
-| Title = Cmod S6 
-| Subtitle = Breadboardable Spartan-6 FPGA Module 
-| Header = Features 
-| Bullet = On-board Adept USB2 port for configuration, test and communications interfaces. 
-| Header = Key Specifications 
-| Logic Cells = 3,840 (6 LUTs) 
-| Block RAM = 216Kb 
-| DSP Slices = 8 
-| CMTs = 2 (4 DCMs and one PLL) 
-| Quad-SPI Flash = 16MB 
-| Header = Connectivity and On-board I/O 
-| GPIO = 46 signals brought to DIP pins 
-| LEDs = 4 
-| Buttons = 2 
-| Clock Inputs = 2 
-| Header = Electrical 
-| Power = USB or power source connected \\  to DIP pin 24 (5-15V) 
-| Logic Level = 3.3V 
-| Header = Physical 
-| Width = 0.7 in 
-| Length = 2.6 in 
-| Header = Design Resources 
-| Master UCF File = {{:reference:programmable-logic:cmod-s6:cmod_s6_master_ucf.zip|ZIP}} 
-| 3D Model = {{:reference:programmable-logic:cmod-s6:cmod_s6_model.zip|STP model}} 
-| Mechanical Drawing = {{:reference:programmable-logic:cmod-s6:cmod_s6_dimensions.zip|DXF }} 
-| Header = Documentation 
-| Primary IC = [[http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf | Spartan-6]] (XC6SLX4-2CPG196) 
-| Reference Manual = {{https://reference.digilentinc.com/reference/programmable-logic/cmod-s6/reference-manual| }} 
-| Schematic = {{:reference:programmable-logic:cmod-s6:cmods6_sch.pdf|Rev. A}} 
-}} 
  
-{{page>reference-manual}} \\ \\ 
-  
-===== Tutorials ===== 
-{{topic>cmod-s6 +tutorial}} 
- 
----- 
-===== Example Projects ===== 
-{{topic>cmod-s6 +project}} 
- 
----- 
-===== Additional Resources ===== 
-  * Cmod S6 factory-loaded demonstration project: {{:cmod_s6:cmods6_demo.zip|ZIP}} 
-  * Cmod S6 Master UCF File for ISE designs: {{:cmod_s6:cmod_s6_master_ucf.zip|ZIP}} 
-  * {{:reference:programmable-logic:cmod-s6:cmod_s6_dimensions.zip|Cmod S6 Mechanical Drawing }} 
- 
----- 
- 
-{{tag>programmable-logic programmable-logic-start cmod-s6 resource-center}}