Cmod S6 (Legacy)
Reference Manual
Technical Support
Cmod S6
Breadboardable Spartan-6 FPGA Module
Features
- On-board Adept USB2 port for configuration, test and communications interfaces.
Key Specifications
Logic Cells
3,840 (6 LUTs)
Block RAM
216Kb
DSP Slices
8
CMTs
2 (4 DCMs and one PLL)
Quad-SPI Flash
16MB
Connectivity and On-board I/O
GPIO
46 signals brought to DIP pins
LEDs
4
Buttons
2
Clock Inputs
2
Electrical
Power
USB or power source connected
to DIP pin 24 (5-15V)
to DIP pin 24 (5-15V)
Logic Level
3.3V
Physical
Width
0.7 in
Length
2.6 in
The Cmod S6 is retired and no longer for sale in our store.
The Digilent Cmod S6 is a small, 48-pin DIP form factor board built around a Xilinx Spartan 6 LX4 FPGA. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, and basic I/O devices. There are 46 FPGA I/O signals that are routed to 100-mil-spaced through-hole pins, making the Cmod S6 well suited for use with solderless breadboards. At just .7” by 2.6” inches, it can also be loaded in a standard socket and used in embedded systems.