Pmod JSTK2
Buy
Reference Manual
Technical Support
Pmod JSTK2
2-axis Joystick
Features
- Factory calibrated Two-axis resistive joystick
- Center joystick button
- Trigger-style pushbutton
- 24-bit RGB LED
- 6-pin Pmod connector with SPI interface
- Follows the Digilent Pmod Interface Specification Type 2
Electrical
Bus
SPI
Specification Version
1.2.0
Logic Level
3.3V
Physical
Width
1.8 in (4.57 cm)
Length
0.94 in (2.38 cm)
J1 Pinout
Pin 1
CS
Pin 2
MOSI
Pin 3
MISO
Pin 4
SCK
Pin 5
GND
Pin 6
VCC
The Digilent Pmod JSTK2 (Revision C) is a versatile user input device that can be easily incorporated into a wide variety of projects. With a two-axis joystick on a center button, a trigger button, and a programmable RGB LED capable of 24-bit color.
Example Projects
Microprocessor
- How to Use the PmodJSTK With the WF32 - Community Project
- Plug and Play Pmods Using LabVIEW - Community Project
- Using the Pmod JSTK2 with Arduino Uno - Application note
Programmable Logic
- How to Build Your Own Claw Game Structure - Community Project
- How to Use a Joystick With an FPGA - Community Project
- Building Jousting Robots - Community Project
- Using a Joystick to Control Stepper Motors with an FPGA - Community Project
-
- Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
Additional Resources
- Specification Version 1.2.0: PDF