High Current Adapter for NI myRIO

Overview

The High Current Adapter for NI myRIO allows you drive high power low speed currents using relays and open drain N-FET otputs trough MXP connector on your myRIO. The switched signals are connected with screw terminals. For open drains a power supply is needed.

Key Features:

• Supports 3V…16V power voltage(external power supply required)
• 4 Open drain outputs
  • Continuous current:3.0A(25°C)/2.2A(85°C)
  • Peak output current:4.1A(t<5s)
• 4 Standard 3 terminal relay outputs
  • Common, Normally Closed, Normally Open
  • Relay output max switching voltage:30V
  • Rated current:1A
• 34-pin female breakout allowing direct access to signal pins
• Uses the myRIO Expansion Port(MXP) connector