Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
microprocessor:cmod:reference-manual [2021/05/14 23:03] – ↷ Page moved from reference:microprocessor:cmod:reference-manual to microprocessor:cmod:reference-manual Arthur Brownmicroprocessor:cmod:reference-manual [2023/02/10 13:25] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ====== Cmod MX1 Reference Manual ====== ====== Cmod MX1 Reference Manual ======
 +
 +<WRAP center round important 60%>
 +The Cmod MX1 is retired and no longer for sale in our store.
 +</WRAP>
  
 The Cmod MX1 is a MPIDE compatible board from Digilent. It combines a Microchip® PIC32MX150F128D microcontroller with a convenient 600-mil, 40-pin DIP package and two Digilent Pmod ports. Digilent’s Cmod boards are ideally suited for breadboards or other prototype circuit designs where the use of small surface mount packages is impractical. The Cmod MX1 is a MPIDE compatible board from Digilent. It combines a Microchip® PIC32MX150F128D microcontroller with a convenient 600-mil, 40-pin DIP package and two Digilent Pmod ports. Digilent’s Cmod boards are ideally suited for breadboards or other prototype circuit designs where the use of small surface mount packages is impractical.
Line 19: Line 23:
 ---- ----
    
-====== Features ======+===== Features =====
  
   * Microchip® PIC32MX150F128D microcontroller (40/50 Mhz 32-bit MIPS, 128K Flash, 32K SRAM)   * Microchip® PIC32MX150F128D microcontroller (40/50 Mhz 32-bit MIPS, 128K Flash, 32K SRAM)
Line 40: Line 44:
 {{ :chipkit_cmod:screen_shot_2015-01-29_at_11.13.45_pm.png?direct&300 |http://chipkit.net/started/learn-basics/mpide-quick-start-guide/}} {{ :chipkit_cmod:screen_shot_2015-01-29_at_11.13.45_pm.png?direct&300 |http://chipkit.net/started/learn-basics/mpide-quick-start-guide/}}
  
-The Cmod MX1 is also fully compatible with the advanced Microchip MPLAB® IDE. To develop embedded applications using MPLAB®, a separate device programmer/debugger, such as the [[http://store.digilentinc.com/chipkit-pgm-programmer-debugger-for-use-with-digilent-chipkit-platforms/|Digilent chipKIT PGM]] or the Microchip PICkit™3 is required.+The Cmod MX1 is also fully compatible with the advanced Microchip MPLAB® IDE. To develop embedded applications using MPLAB®, a separate device programmer/debugger, such as the Digilent chipKIT PGM or the Microchip PICkit™3 is required.
  
 ---- ----
Line 73: Line 77:
 ---- ----
 ===== 2. Programming Tools ===== ===== 2. Programming Tools =====
-The Cmod MX1 can be used with either MPIDE or the Microchip MPLAB® development environment. When used with the MPLAB IDE, in-system programming and debugging of firmware running on the PIC32MX150 microcontroller is supported using an external programming/debugging circuit licensed from Microchip, such as the [[http://store.digilentinc.com/chipkit-pgm-programmer-debugger-for-use-with-digilent-chipkit-platforms/|chipKIT PGM]] or the [[http://store.digilentinc.com/pickit-3-in-circuit-debugger/|PICkit 2/3]].+The Cmod MX1 can be used with either MPIDE or the Microchip MPLAB® development environment. When used with the MPLAB IDE, in-system programming and debugging of firmware running on the PIC32MX150 microcontroller is supported using an external programming/debugging circuit licensed from Microchip, such as the chipKIT PGM or the PICkit 2/3.
  
 The Cmod MX1 is immediately usable with either the MPLAB IDE or the MPIDE. The Cmod MX1 is immediately usable with either the MPLAB IDE or the MPIDE.