Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
learn:instrumentation:tutorials:analog-discovery-studio-impedance-analyzer [2019/07/03 22:59] – Arthur Brownlearn:instrumentation:tutorials:analog-discovery-studio-impedance-analyzer [2019/07/12 21:04] – [2. Using the Impedance Analyzer] Arthur Brown
Line 51: Line 51:
 <WRAP group> <WRAP group>
 <WRAP column half> <WRAP column half>
-//An Impedance Analyzer is used to analyze capacitive and inductive elements. This section walks through setting up the //Impedance// tool to capture the impedance and phase of a common capacitor over a default frequency range. It uses the //Wavegen// and //Scope// instruments in addition to an external reference resistor whose value is determined from a table in relation to the range of capacitance or inductance of the device under test (DUT). This table is presented to the right. When the //Impedance// instrument is started, the //Scope// and //Wavegen// are stopped if they were running and their status shows "Busy". The //Impedance// instrument takes control over these instruments while running.//+An Impedance Analyzer is used to analyze capacitive and inductive elements. This section walks through setting up the //Impedance// tool to capture the impedance and phase of a common capacitor over a default frequency range. It uses the //Wavegen// and //Scope// instruments in addition to an external reference resistor whose value is determined from a table in relation to the range of capacitance or inductance of the device under test (DUT). This table is presented to the right. When the //Impedance// instrument is started, the //Scope// and //Wavegen// are stopped if they were running and their status shows "Busy". The //Impedance// instrument takes control over these instruments while running.
 </WRAP> </WRAP>
 <WRAP column half> <WRAP column half>