chipKIT Pro MX7 Resource Center

Welcome to the resource center for the Pro MX7!

Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down. If you are interested in purchasing the Pro MX7, visit the product page on our main website: chipKIT Pro MX7

The chipKIT™Pro MX7 is a microcontroller development board based on the Microchip PIC32MX795F512L, a member of the 32-bit PIC32 microcontroller family. It is compatible with Digilent’s line of Pmod™ peripheral modules, and is suitable for use with the Microchip MPLAB® IDE tools. The chipKIT Pro MX7 is also compatible for use with the chipKIT™ MPIDE development environment. ChipKIT and MPIDE is a PIC32 based system compatible with many existing Arduino™ code examples, reference materials and other resources.

• Schematic – PDF
  • PDF Schematic of the PCB generated by Altium
• Reference Manual
  • Wiki Page, this has the most up to date information.
  • Downloadable PDF file

• Download This zip file contains libraries and documentation for using the Network Shield, WiFi Shield, and PmodWiFi with the chipKIT MPIDE. The libraries provide Ethernet (TCP/IP and UDP), USB Host, USB Device, CAN, and WiFi support.
• Download This zip file contains a simple MPLAB demonstration project for the chipKIT™Pro MX4 / Cerebot MX4cK. This basic project blinks the LEDs on the board.
• Download Programmer's Reference Manuals for the Digilent chipKIT DSPI and SoftSPI libraries for use with the chipKIT MPIDE software system.
• Download This simple example sketch for MPIDE blinks an LED on supported chipKIT boards.
• Download chipKIT™ bootloader Image loaded into the chipKIT™Pro MX4 / Cerebot MX4cK's PIC32 microcontroller at the factory.
• Download Example design for a Robotic Starter Kit used in conjunction with a Cerebot MX4cK. This design will drive the RSK motors forward.
• Download Open source EAGLE project for the chipKIT Pro MX4. Created in EAGLE v6.5 (REV.A)

• Digilent Forum