Set Up WiFi On The OpenScope MZ
Free up your debugging by connecting your OpenScope MZ to WiFi.
Free up your debugging by connecting your OpenScope MZ to WiFi.
Test your eagle eyes and riddle solving abilities with this fun and informative game!
Designing filters with tight specifications and/or matching impedances? Then make sure to check out the Impedance Analyzer tool, and see if it can be useful to your project.
See the Analog Discovery 2 in action, making public spaces better places one on-screen screen smile at a time!
Looking to add a touchscreen to your Arduino/chipKIT project? Well look no further, as the new Digilent Multi-Touch Display shield may be exactly what you need to add that special touch to your project!
Check out some new documentation on the Digilent wiki!
Miranda examines the dynamics of an age-old relationship.
Adam Taylor’s MicroZed Chronicles continue with this exciting installment.
Check out Mitchell’s latest project involving Linux and FPGA.
The Digital Discovery squares off in this new review, courtesy of Element14.com.
Check out this awesome resource for the Digital Discovery courtesy of Digi-Key!
Running the same measurement 500 times, logging data overnight, or feeding captured samples directly into a Python analysis pipeline is where the WaveForms graphical application may start to fall short. …
A blown fuse is one of the easier electrical faults to track down. Whether you’re chasing a dead accessory in your car, reviving a silent audio amplifier, checking an appliance, …
How to Test a Relay With a Multimeter: A Detailed Guide A multimeter tests a relay in two ways. First, set it to ohms (Ω) mode and measure the coil …
To measure current with a multimeter, you break the circuit and insert the meter in series. Set the meter to A (amps) or mA, plug the red probe into the …