Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
analog_discovery_bnc_adapter_board:analog_discovery_bnc_adapter_board [2015/04/08 19:28] – created Martha | analog_discovery_bnc_adapter_board:analog_discovery_bnc_adapter_board [2021/10/13 21:06] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== | + | ~~REDIRECT> |
+ | |||
+ | ====== | ||
+ | |||
+ | {{ : | ||
+ | |||
+ | **Welcome to the resource center for the BNC Adapter board!** | ||
+ | |||
+ | Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down. If you are interested in purchasing the Analog Discovery BNC Adapter board, visit the product page on our main website: [[https:// | ||
The Discovery BNC adapter board is intended to be used with the Analog Discovery™ tool to enable the use of standard BNC terminated test leads and probes. The adapter board enables the user to AC couple or DC couple signals to the oscilloscope in the Analog Discovery. | The Discovery BNC adapter board is intended to be used with the Analog Discovery™ tool to enable the use of standard BNC terminated test leads and probes. The adapter board enables the user to AC couple or DC couple signals to the oscilloscope in the Analog Discovery. | ||
- | {{:analog_discovery_bnc_adapter_board: | + | ==Note: The Analog Discovery BNC adapter board does not have differential analog (scope) inputs== |
- | Features include: | + | ---- |
+ | |||
+ | |||
+ | =====Revision History ===== | ||
+ | |||
+ | We are currently on Revision B of the BNC Adapter board. | ||
+ | You can find the revision of your board by looking on the top of the board underneath the name. | ||
+ | |||
+ | |||
+ | {{ :analog_discovery_bnc_adapter_board: | ||
- | * Standard BNC interface to BNC terminated test leads and oscilloscope probes. | ||
- | * Selectable AC and DC coupling to oscilloscope probes. | ||
- | * Selectable 50-ohm or 0-ohm output impedance on Arbitrary Waveform Generator (AWG) channels. | ||
---- | ---- | ||
- | ====== Functional Description ====== | + | ===== Documentation |
- | The Discovery BNC adapter board has BNC terminations to each of the two oscilloscope channels on the Analog Discovery. Each channel | + | |
+ | * **Schematic** -- {{: | ||
+ | * **Reference Manual** -- [[refmanual|Wiki Page]] {{: | ||
+ | * Technical description | ||
+ | * **Sell Sheet** -- {{: | ||
- | The two AWG channels are equipped with BNC terminations for use with BNC style test leads. Each of the two channels can have either the 50Ω or the 0Ω termination selected. This enables the user to match the Analog Discovery' | ||
- | All the remaining signals from the Analog Discovery pass through the adaptor to a female header located on the outer edge of the board. | ||
+ | ===== External Links ===== | ||
+ | * [[https:// |