Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
add-ons:audio-adapter:getting-started-guide [2021/05/14 23:04] – ↷ Page moved from reference:add-ons:audio-adapter:getting-started-guide to add-ons:audio-adapter:getting-started-guide Arthur Brownadd-ons:audio-adapter:getting-started-guide [2023/09/19 17:55] (current) – Arthur Brown
Line 19: Line 19:
  
   * A Digilent Test & Measurement Device with Analog Input and Output Channels:   * A Digilent Test & Measurement Device with Analog Input and Output Channels:
-    * [[http://store.digilentinc.com/analog-discovery-2-100msps-usb-oscilloscope-logic-analyzer-and-variable-power-supply/|Analog Discovery 2]] +    * [[https://digilent.com/shop/analog-discovery-2-100ms-s-usb-oscilloscope-logic-analyzer-and-variable-power-supply/|Analog Discovery 2]] 
-    * [[https://store.digilentinc.com/analog-discovery-100msps-usb-oscilloscope-logic-analyzer-limited-time/|Analog Discovery (Legacy)]] +    * Analog Discovery (Legacy) 
-  * [[https://store.digilentinc.com/audio-adapter-for-analog-discovery/ |Audio Adapter Add-on Board]] +  * [[https://digilent.com/shop/audio-adapter-for-analog-discovery/|Audio Adapter Add-on Board]] 
-  * [[http://store.digilentinc.com/waveforms-2015-download-only/|WaveForms software]] +  * [[https://digilent.com/shop/software/digilent-waveforms/|WaveForms software]] 
   * A computer with a USB port   * A computer with a USB port
-  * A [[http://store.digilentinc.com/usb-a-to-micro-b-cable/|USB A to Micro B cable]]+  * A [[https://digilent.com/shop/usb-a-to-micro-b-cable/|USB A to Micro B cable]]
   * A load of interest to test and a stereo audio 3.5mm jack cable.   * A load of interest to test and a stereo audio 3.5mm jack cable.
 +
 +<WRAP round info>
 +Note: If you're looking for the Audio Adapter+ for Analog Discovery 3, check out its resource center, here: [[add-ons/audio-adapter-plus/start]]
 +</WRAP>
  
 ---- ----
Line 109: Line 113:
 ==== Next Steps ==== ==== Next Steps ====
  
-For more guides on how to use the Digilent Test and Measurement Device, return to the device's Resource Center, linked from the [[reference:test-and-measurement:start]] page of this wiki.+For more guides on how to use the Digilent Test and Measurement Device, return to the device's Resource Center, linked from the [[test-and-measurement:start]] page of this wiki.
  
-If voltage values seen in the //Scope// are significantly different from expected, please calibrate the device by following the [[reference:test-and-measurement:guides:waveforms-calibration|Calibration Guide]].+If voltage values seen in the //Scope// are significantly different from expected, please calibrate the device by following the [[test-and-measurement:guides:waveforms-calibration|Calibration Guide]].
  
-For more information on WaveForms visit the [[reference:software:waveforms:waveforms-3:reference-manual|WaveForms Reference Manual]]. +For more information on WaveForms visit the [[software:waveforms:waveforms-3:reference-manual|WaveForms Reference Manual]]. 
  
-For technical support, please visit the [[https://forum.digilentinc.com/forum/8-scopes-instruments/|Scopes and Instruments]] section of the Digilent Forums.+For technical support, please visit the [[https://forum.digilent.com/forum/8-test-and-measurement/|Test and Measurement]] section of the Digilent Forums.
  
 ---- ----