Editor’s Note – In this series, we will take a behind the scenes look at how an engineer tackles a project from beginning to end. What challenges will come up? …
Editor’s Note – In this series, we will take a behind the scenes look at how an engineer tackles a project from beginning to end. What challenges will come up? …
Editor’s Note – In this series, we will take a behind the scenes look at how an engineer tackles a project from beginning to end. What challenges will come up? …
Some time ago, we had an old NES controller floating around the office. It wasn’t your run-of-the-mill NES controller, though – it had been “tampered” with. Instead of the normal …
One lucky user was tasked to see what the Genesys ZU was capable of.
Pablo at ControlPaths.com has written a guide for creating a custom AXI IP using the Genesys ZU, but any Zynq MPSoC will do. We’re partial to the Genesys ZU though. …
The Arty S7, our FPGA development board using the cost efficient Xilinx Spartan 7, gives users plenty of I/O and expansion options to work with. Since its inception in 2018, …
Pablo from controlpaths.com lent his expertise in Fast Fourier Transform (FFT) and applied it to our Eclypse Z7 board (using the SYZYGY Zmod ADC and DAC, and Xilinx’s xFFT IP). …
In the world of artificial intelligence (AI), the recognition of handwritten digits proves that you got your neurons right and in working condition. This application of AI is already quite …
A discussion of how ground potential differences can (and will) effect oscilloscope measurements.
Picture this scenario: you need to develop an embedded vision application – something like an object detection system or real time digital video processing – but you don’t have the …
Create a unique lightshow experience with the Pmod KYPD and Arduino!
Mixed-Signal Oscilloscope vs. Digital Storage Oscilloscope A mixed-signal oscilloscope, or MSO, combines the analog channels of a digital storage oscilloscope, or DSO, with digital logic-analyzer channels in one instrument. A …
Every FPGA development workflow depends on several connected pieces: a programming and debugging interface, a design environment, expansion hardware, and the accessories needed to connect and power the system. Many …
The best FPGA board for a beginner is affordable, approachable, and backed by strong learning resources. Think of it as an FPGA starter kit designed to help you begin building …
Running the same measurement 500 times, logging data overnight, or feeding captured samples directly into a Python analysis pipeline is where the WaveForms graphical application may start to fall short. …
