Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
programmable-logic:pynq-z1:start [2022/10/19 21:13] – Update the SD card image link and move downloads and docs links out of the infobox Arthur Brownprogrammable-logic:pynq-z1:start [2023/10/11 19:00] (current) – release statement of volatility Arthur Brown
Line 1: Line 1:
 +~~NOTOC~~ 
 +     
 +====== PYNQ-Z1 ======
 +{{Digilent Infobox
 +| Store Page = https://digilent.com/shop/pynq-z1-python-productivity-for-zynq-7000-arm-fpga-soc/
 +| Manual = [[reference-manual]]
 +| Support = http://pynq.io
 +| Title = PYNQ-Z1 
 +| Subtitle = Python Productivity for Zynq
 +| Header = Features
 +| Bullet = Fully supported by the PYNQ framework 
 +| Bullet = 650MHz dual-core Cortex-A9 processor
 +| Bullet = 512 MB DDR3
 +| Bullet = Wide range of USB, Ethernet, Video and Audio connectivity
 +| Bullet = Arduino shield and Pmod connectors for adding-on hardware devices
 +| Bullet = Programmable from JTAG, Quad-SPI flash, and microSD card
 +| Header = Key FPGA Specifications
 +| Logic slices = 13,300 
 +| 6-input LUTs =  53,200
 +| Flip-Flops = 106,400
 +| Block RAM = 630 KB
 +| DSP Slices = 220
 +| Clock Resources = Zynq PLL with 4 outputs \\ 4 PLLs \\ 4 MMCMs \\ 125 MHz external clock
 +| Internal ADC = Dual-channel, 1 MSPS
 +| Header = Connectivity and On-board I/O
 +| USB = USB-UART \\ USB-JTAG Programmer \\ USB Host
 +| Ethernet = Gigabit Ethernet PHY
 +| HDMI = Sink (input) \\ Source (output)
 +| Microphone = Microphone with PDM interface
 +| Audio = PWM driven mono audio output \\ with 3.5mm jack
 +| Pmod Connectors = 2
 +| Other Connectors = Arduino/chipKIT shield connector
 +| Switches = 2 slide switches
 +| Buttons = 4 Push buttons 
 +| LEDs = 4 LEDs, 2 RGB LEDs
 +| Header = Electrical
 +| Power Inputs = USB \\ 7V-15V External source
 +| Header = Physical
 +| Width = 88 mm
 +| Length = 124 mm
 +| Header = Product Compliance
 +| HTC = 8471500150
 +| ECCN = 5A992.c
 +}}
  
 +{{page>reference-manual}} \\ \\
 + 
 +===== Documentation =====
 +  * [[./reference-manual|Pynq Z1 Reference Manual]]
 +  * [[learn/programmable-logic/doc/xilinx/zynq-datasheet]]
 +  * [[learn/programmable-logic/doc/xilinx/zynq-technical-reference-manual]]
 +
 +  * PYNQ Manual: [[http://pynq.readthedocs.io|pynq.readthedocs.io]]
 +  * PYNQ Github: [[https://github.com/Xilinx/PYNQ|PYNQ Github]]
 +
 +  * {{:reference:programmable-logic:pynq-z1:pynq-z1_sch.pdf|Pynq Z1 Rev. C Schematic}}
 +  * {{https://files.digilent.com/resources/programmable-logic/pynq-z1/pynq-z1-sch-f0.pdf|Pynq Z1 Rev. F Schematic}}
 +
 +  * {{https://files.digilent.com/resources/programmable-logic/documents/RTL8211F_PCN.pdf|Product Change Notice - Ethernet PHY}}
 +  * {{https://files.digilent.com/resources/programmable-logic/documents/W25Q128JV_PCN.pdf|Product Change Notice - Flash Memory}}
 +
 +**Note:** //Xilinx software tools are not available for download in some countries. Prior to purchasing the PYNQ-Z1, please check the supporting software's availability, as it is required for the board's use.//
 +
 +----
 +===== Design Resources =====
 +  * Boot images for the Pynq Z1 can be found on the project site's [[http://www.pynq.io/board.html|Development Boards]] page.
 +  * Master XDC: {{:reference:programmable-logic:pynq-z1:pynq-z1_c.zip|Download}}
 +  * Zynq Presets: {{ :reference:programmable-logic:pynq-z1:pynq_revc.zip |Download}}
 +  * Protective Acrylic Case: {{ :reference:programmable-logic:pynq-z1:pynq_case.zip |Download}}
 +  * 3D model: {{ :reference:programmable-logic:pynq-z1:pynq-z1_3d.zip |Download}}
 +  * 3D Case: {{ :reference:programmable-logic:pynq-z1:pynq_case_modified.zip |Download }}
 +
 +----
 +===== Tutorials =====
 +{{topic>pynq-z1 +tutorial}}
 +All support and project tutorials for PYNQ are found at the project webpage at [[http://www.pynq.io/ |www.pynq.io]].
 +----
 +===== Example Projects =====
 +{{topic>pynq-z1 +project}}
 +All support and project tutorials for PYNQ are found at the project webpage at [[http://www.pynq.io/ |www.pynq.io]].
 +----
 +===== Additional Resources ===== 
 +  * [[https://www.xilinx.com/support/university/workshops.html|Xilinx Vivado Workshop materials]]
 +  * {{https://files.digilent.com/resources/programmable-logic/pynq-z1/pynq-z1-statement-of-volatility.pdf|Pynq Z1 Statement of Volatility}}
 +
 +----
 +
 +{{tag>programmable-logic programmable-logic-start pynq-z1 resource-center}}