Analog Discovery Pro (ADP5250)
Buy
Getting Started
Reference Manual
Technical Support
Analog Discovery Pro (ADP5250)
Portable High Resolution Mixed Signal Oscilloscopes
Software
WaveForms
Resource Center
WaveForms SDK
Resource Center
The ADP5250 is Windows® only
Mixed Signal Oscilloscope - Analog Inputs
Channels
2 single ended, non-isolated
Resolution
8 bits
Sample Rate
1
GS/s
single channel, 500
MS/s
per channel in dual channel mode
Input Range
40 V peak to peak, maximum
Bandwidth (-3dB)
100
MHz
Input Impedance
1 MΩ ││ 20 pF
Accuracy
±2% of input / ±1% full scale
Buffer Size
1 MS per channel, maximum
Mixed Signal Oscilloscope - Digital Inputs
Channels
32
Sample Rate
1
GS/s
Record Length
1 MS typical
Input Voltage
0 V to 5 V
Input Threshold
0 V to 2 V
Arbitrary Waveform Generator (Wavegen)
Channels
1
Resolution
14 bits
Sample Rate
125
MS/s
Output Impedance
50 Ω
Switchable Filter
36
MHz
lowpass, 7-pole, elliptical
Output Range
±12 V, maximum
DC Offset
±12 V, maximum
Data Logger
Channels
2 (Shared with Oscilloscope)
Supported Measurements
DC, True RMS, AC RMS, Custom
Programmable Power Supply
Outputs
0 to +6 V / 0 to 1 A
0 to +25 V / 0 to 500 mA (isolated)
0 to -25 V / 0 to 500 mA (isolated)
Digital Multimeter
Measurements
DC Voltage, AC Voltage, AC Current, Resistance, Diode, Continuity
Digits
5½
Sample Rate
5
S/s
Digital I/O
Channels
8
Logic Level
5 V compatible TTL input / 3.3 V LVTTL output
Logic Analyzer
Shares digital inputs with Mixed Signal Oscilloscope
Spectrum Analyzer
Inputs
Shared with Oscilloscope
Frequency Range
DC to max bandwidth of scope
Display Modes
magnitude, average, peak hold, min hold, count
Network Analyzer
Inputs / Outputs
Shared with Oscilloscope and Waveform Generator
Frequency Sweep Range
1 mHz to 10
MHz
Product Compliance
HTC
8471809000
ECCN
3A992.a
Getting Started
Getting Started Guide
Documentation
Reference Manual
Specifications
Tutorials
WaveForms Instruments
Using the Oscilloscope
Using the Waveform Generator
Using Power Supplies with a Readback Plot
Using the DMM
Using the Data Logger
Using the Logic Analyzer
Using the Static I/O
Using the Spectrum Analyzer
Using the Network Analyzer
Using the Impedance Analyzer
Using the Script Editor
Other Tutorials
Calibrating a Digilent Test and Measurement Device
Compensating BNC Oscilloscope Probes
Saving and Sharing WaveForms Workspaces
Using Cross Triggering
Using External Triggers
Getting Started with WaveForms SDK
Getting Started with LabVIEW and a Digilent Discovery Device
Featured Projects
High Voltage Transistor Tester with the Analog Discovery Pro 5250
Power Measurement with the Analog Discovery Pro (ADP5250)
Embedded World 2022 RF Demo with the ADP5250 and USRP B205 Mini-i
FM Radio with the Analog Discovery Pro (ADP5250)
Additional Resources
Analog Discovery Pro (ADP5250) Certifications
Statement of Volatility
resource-center