Can You Put a Microprocessor on an FPGA?
Brandon examines the age old question… can you put a microprocessor on an FPGA?
Events – Digilent Blog: Author: Brandon Kallaher
Digilent USB Scopes, Analyzers, Generators: Info & Use Cases / How-To Guides and Technical Workflows – Digilent Blog
When is a Multimeter Not Enough?
Brandon explores the different scenarios in which you can use a digital multimeter, and when you should use the Analog Discovery!
MiB vs MB- Whats the Difference?
Brandon K. provides a quick rundown on the nuances of notation.
FPGA Products: What They Are & How to Use Them - Digilent / How-To Guides and Technical Workflows – Digilent Blog
PAL vs. CPLD vs. FPGA
Brandon K. provides a quick rundown on the differences between these three terms you are likely to encounter if working with digital logic!
USB Functionality on Our Boards
Brandon provides a detailed overview of USB and what it can do with our FPGAs!
FPGA Products: What They Are & How to Use Them - Digilent / How-To Guides and Technical Workflows – Digilent Blog
How to Know Your Signal Polarity
Brandon guides us through how to figure out signal polarity for your FPGA.
The Claw Game is Getting an Upgrade
The Claw Game is back… and better than ever with its flashy new upgrades!
FPGA Products: What They Are & How to Use Them - Digilent / How-To Guides and Technical Workflows – Digilent Blog
Setting Up Vivado with the Digilent IP Cores
Recently, I have been working on a project using the Arty and MicroBlaze. The Arty has four headers for use with the Digilent Pmod line-up. As I don’t have much experience …
Be the first
to know.
Sign up for Digilent's monthly newsletter for product updates and more!
Recent Articles
Running the same measurement 500 times, logging data overnight, or feeding captured samples directly into a Python analysis pipeline is where the WaveForms graphical application may start to fall short. …
A blown fuse is one of the easier electrical faults to track down. Whether you’re chasing a dead accessory in your car, reviving a silent audio amplifier, checking an appliance, …
How to Test a Relay With a Multimeter: A Detailed Guide A multimeter tests a relay in two ways. First, set it to ohms (Ω) mode and measure the coil …
To measure current with a multimeter, you break the circuit and insert the meter in series. Set the meter to A (amps) or mA, plug the red probe into the …