Zmod Scope 1210: 2-channel 12-bit Oscilloscope Module

(No reviews yet) Write a Review

Please note:  the Zmod Scope 1210-125 (SKU: 410-396-4) is no longer in production. Once the current inventory is depleted, it will be retired and no longer for sale in our store.

The Zmod Scope 1210 series is one of Digilent's SYZYGY-compliant expansion modules. The SYZYGY standard offers a much higher speed/bandwidth digital interface than Pmods, but at a much smaller and lower-cost form-factor than FMC, enabling the user to configure an FPGA development board with the right I/O for their application.

Driven by the SYZYGY carrier, the Zmod Scope can simultaneously acquire two ±25V signals with 12 bits of resolution at a sample rate up to 125MS/s (40MS/s for the 1210-40 version). Analog inputs can be connected to a circuit using SMA cables.

When coupled to a base board using SYZYGY expansion, like the Eclypse Z7 or Genesys ZU, the combination will serve as a powerful prototyping platform for instrumentation, high-speed control, and SDR . By utilizing these expansion capabilities, users can spend more time on the analytical and system-level aspects of the solution rather than having to focus on the component-level interactions of the devices.

Guides and demos are available to help you get started quickly with the Zmod Scope. These can be found through the Support Materials tab.

  • Channels: 2
  • Channel type: single-ended
  • Resolution: 12-bit
  • Input range: ±1V (High Gain) or ±25V (Low Gain)
  • Absolute Resolution 12.8mV (High Gain) or 0.51mV (Low Gain)
  • Sample rate (real time): 125MS/s for 1210-125, 40MS/s for 1210-40
  • Input impedance: 1MΩ||18pF
  • Analog bandwidth:
    • 1210-40: 20 MHz @ 3dB, 8 MHz @ 0.5dB, 4 MHz @ 0.1dB
    • 1210-125: 70 MHz @ 3dB, 30MHz @ 0.5dB, 20 MHz @ 0.1 dB
  • Input protected to: ±50V
  • Product Compliance:
    • HTC: 8473301180
    • ECCN: EAR99
  • Zmod Scope 1210-40 or 1210-125
  • Screws for securing the Zmod to compatible host board (4 M3x5mm)
  • Digilent custom packaging with protective foam

Digilent provides the Zmod Library along with both baremetal and PetaLinux software demos to support both the Zmod Scope and Zmod AWG. At the time of writing, only the Zmod AWG and Zmod Scope 1410-105 are supported. A hardware-only demo making use of the Eclypse's Zynq PL that supports all variants is available. Visit the Support Materials tab to access more information.

Quickly find what you need to get started and reduce mean time to test.

All product support including documentation, projects, and the Digilent Forum can be accessed through the product resource center.

Resource Center

Quick Links

Reference Manual