Pmod SF3
Buy
Reference Manual
Technical Support
Pmod SF3
32MB Serial NOR Flash
Features
32MB serial NOR Flash memory
Supports extended SPI protocol, dual I/O, and quad I/O
Minimum 100,000 erase cycles per sector
More than 20 years data retention
Follows the Digilent
Pmod Interface Specification
Electrical
Bus
SPI
Specification Version
1.2.0
Logic Level
3.3V
Physical
Width
1.0 in (2.51 cm)
Length
0.80 in (2.03cm)
Design Resources
Documentation
Primary IC
Data Sheet
Reference Manual
Pmod SF3 Reference Manual
Schematic
J1 Pinout
Pin 1
~CS
Pin 2
MOSI
Pin 3
MISO
Pin 4
SCLK
Pin 5
GND
Pin 6
VCC
Pin 7
NC
Pin 8
RST#
Pin 9
WP#
Pin 10
HLD#
Pin 11
GND
Pin 12
VCC
The Digilent Pmod SF3 (Revision A) provides 32
MB
of serial Flash memory.
Example Projects
Microprocessor
Installing the Digilent Core for Arduino
Library and MPIDE Example
Programmable Logic
Arty A7 100T project using the Pmod SF3 and Pmod CLS created by user Tim S. on the Digilent Forum
Forum thread
Zybo Z7-20 project using the Pmod SF3 and Pmod CLS created by user Tim S. on the Digilent Forum
Forum thread
Getting Started with Digilent Pmod IPs
Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
Additional Resources
Specification Version 1.2.0:
PDF
pmod
,
pmod-start
,
pmod-spi
,
pmodsf3
,
resource-center