The JTAG-USB Cable is no longer in production. Once the remaining inventory is depleted, it will be retired.
Note: This cable is not needed for Digilent FPGA boards as our boards are designed with this functionality natively.
The JTAG-USB cable allows you to use your PC to connect to a JTAG scan chain or to access an SPI interface on a board equipped with the appropriate 6-pin header. In this way, you can program devices on Digilent programmable logic boards using the Digilent Adept Suite. You can also program AVR micrcontrollers on Digilent embedded control boards using the Digilent AVR programmer application.
- Low-cost JTAG configuration solution
- Connects to the USB port of a PC, and to a standard 6-pin JTAG programming header
- Can be used with Digilent Adept Suite & AVR Device Programmer software
- Can program devices that have a JTAG voltage of 1.8V or greater
- One JTAG-USB cable
FPGA programming is accomplished via the Digilent Adept Suite Software, which can be downloaded from the following pages: