Fulltext results:
- Digilent Pro MX7 Reference Manual @microprocessor:pro-mx7
- within the MPIDE development environment * Six Pmod ports for Digilent peripheral module boards * ... modules/pmods/|digilent.com]]. In addition to the Pmod ports, the board provides three push buttons and ... the 5V0 side of the power select jumpers for the Pmod ports. The voltage on the VCC5V0 bus will be 5V w... e power to any peripheral modules attached to the Pmod ports, JA-JF, and to I2C devices powered from the
- Pro MX4 Reference Manual @microprocessor:pro-mx4
- family. It is compatible with Digilent’s line of Pmod™ peripheral modules, and is suitable for use with... within the MPIDE development environment * nine Pmod connectors for Digilent peripheral * module boa... d is specially designed to work with the Digilent Pmod™ line of peripheral modules to provide a variety ... modules/pmods/|digilent.com]]. In addition to the Pmod connectors, the board provides eight connectors f
- Basys MX3 Reference Manual @microprocessor:basys-mx3
- h * **Expansion Connectors** * Two standard Pmod ports * 16 Total microcontroller I/O * ... , where the SPI2 pins are mapped over the pins of PMOD A connector. ===== 1.5. CPU Clock Source ===== T... s been completed. --> Predefined Characters # {{/pmod/pmod/clp/pmodclp_predefinedcharacters.jpg}} <-- The display has more DDRAM locations (2*40) than can b
- MX3 Reference Manual @microprocessor:mx3
- family. It is compatible with Digilent’s line of Pmod™ peripheral modules, and is suitable for use with... e power to any peripheral modules attached to the Pmod connectors, JA-JE, and to I2C devices connected to the I2C daisy chain connector, J2. Each Pmod connector provides power pins that can be powered... lso possible to power the MX3 from any one of the Pmod connectors or the I2C connector. When powering th
- Cerebot MC7 Reference Manual @microprocessor:cerebot-mc7
- g circuit * One CAN network interface * Three Pmod connectors for Digilent peripheral module boards ... cially designed to work with the Digilent line of Pmod peripheral modules with various input and output ... ion, see www.digilentinc.com. In addition to the Pmod connectors, the board provides two push buttons a... the 5V0 side of the power select jumpers for the Pmod connectors. The third power supply is a 5V switc
- Cerebot 32MX4 Reference Manual @microprocessor:cerebot-32mx4
- Microchip MPLAB development environment * Nine Pmod connectors for Digilent peripheral module boards ... -components/system-board-expansion-modules/pmods/|Pmod category]]. In addition to the Pmod ports, the board supports direct connection of up to 8 RC hobby ser... e power to any peripheral modules attached to the Pmod connectors and to I2C devices powered from the I2
- Universal Development Board Reference Manual @microprocessor:udb
- . This board also has discrete I/O elements and 2 Pmod ports for further device evaluation or product de... -Bit PIC * 28 Pin PIC24/dsPIC33/PIC32MX * Two Pmod ports * Three Push Buttons * Two Analog POTs ... | 28 Pin 8 BIT PIC | | **14** | Pmod port | **29** | DIP curr... pere settings for I2C pull-ups}} ---- ===== 9. Pmod Interface ===== The UDB board provides two Pmod p
- Cmod MX1 Reference Manual @microprocessor:cmod
- ient 600-mil, 40-pin DIP package and two Digilent Pmod ports. Digilent’s Cmod boards are ideally suited ... analog inputs * 3.3V operating voltage * Two Pmod ports for Digilent peripheral module boards --... ta lines used by the USB serial converter, or the Pmod ports (see the schematic for details). If these p... icrochip ICSP Connector | | 3 | J1-J2 Digilent Pmod ports | | 4 | 40 Pin DIP connector | | 5
- Basys MX3 Migration Guide @microprocessor:basys-mx3
- peripherals. ===== New features ===== * 2 Pmod ports (16 total microcontroller I/O) * 8 slide ... | PIC32MX370F512L 32-bit processor | | 0 Pmod ports with PPS* functionality | 2 Pmod ports with PPS* functionality | | 90 user accessible digita... /*| 14 10-bit analog input channels available on Pmod ports | 3 10-bit analog input channel
- Orbit BoosterPack Reference Manual @microprocessor:orbit-boosterpack
- of the LaunchPad, as well as introducing Digilent Pmod expansion connectors. {{Digilent Image Gallery ... s of your Tiva LaunchPad kit * Two 1x6 Digilent Pmod connectors * 3-axis accelerometer * I2C tempe... oosterPack Resource Center. ==== 1.2. Digilent Pmod Connectors ==== Two 1x6 pin female Digilent Pmod connectors are provided for functional expansion of t
- Orbit BoosterPack @microprocessor:orbit-boosterpack
- = Add-on board for TI \\ Stellaris LaunchPad and Pmod \\ expansion connectors | Display = 128×32 pixel OLED display | Pmod Port = 2 1x6 Pmod ports | Push-buttons = 2 | Slide Switches = 2 | User LED = 4 | Potentiometer = 1 }}
- MX3 @microprocessor:mx3
- ipKIT MX3 | Subtitle = Microcontroller Board with Pmod Headers | Header = Features | Bullet = 42 I/O pin... 128KB | Header = Connectivity and On-board I/O | Pmod Ports = 5 12-pin Pmod ports | USB = A | Mini-B | Buttons = 1 Reset button | User LED = 2 | Header = Ele
- Uno32 @microprocessor:uno32
- uno32:chipkit-uno32-v01000303.zip|Bootloader }} | Pmod Shield-UNO Files = {{:reference:microprocessor:uno32:pmod_shield_variant.zip|Pmod Shield for Uno }} | PmodOLED Libraries = {{:reference:microprocessor:uno32:oled
- Cmod MX1 @microprocessor:cmod
- = 128K | Header = Connectivity and On-board I/O | Pmod Ports = 2 12-pin Pmod ports | USB = A | Micro A/B | SPI = 2 SPI connectors | I2C = 2 I2C connectors | U
- Pro MX4 @microprocessor:pro-mx4
- 512KB | Header = Connectivity and On-board I/O | Pmod Ports = 9 12-pin Pmod ports | Servo connectors = 8 | USB 2.0 OTG = A | Micro A/B | Push-buttons = 2 | L