ZedBoard Zynq-7000 Development Board Reference Manual

ZedBoard is a low-cost development board for the Xilinx Zynq-7000 all programmable SoC (AP SoC). This board contains everything necessary to create a Linux®, Android®, Windows®, or other OS/RTOS based design. Additionally, several expansion connectors expose the processing system and programmable logic I/Os for easy user access.

Take advantage of the Zynq-7000 AP SoCs tightly coupled ARM® processing system and 7-series programmable logic to create unique and powerful designs with the ZedBoard. Target applications include video processing, motor control, software acceleration, Linux/Android/RTOS development, embedded ARM processing, and general Zynq-7000 AP SoC prototyping.

Download the User Guide

Features

  • Xilinx® XC7Z020-1CSG484CES EPP
    • Primary configuration = QSPI Flash
    • Auxiliary configuration options
      • Cascaded JTAG
      • SD Card
  • Memory
    • 512 MB DDR3 (128M x 32)
    • 256 Mb QSPI Flash
  • Interfaces
    • USB-JTAG Programming using Digilent SMT1-equivalent circuit
      • Accesses PL JTAG
      • PS JTAG pins connected through PS Pmod
    • 10/100/1G Ethernet
    • USB OTG 2.0
    • SD Card
    • USB 2.0 FS USB-UART bridge
    • Five Digilent Pmod™ compatible headers (2×6) (1 PS, 4 PL)
    • One LPC FMC
    • One AMS Header
    • Two Reset Buttons (1 PS, 1 PL)
    • Seven Push Buttons (2 PS, 5 PL)
    • Eight dip/slide switches (PL)
    • Nine User LEDs (1 PS, 8 PL)
    • DONE LED (PL)
  • On-board Oscillators
    • 33.333 MHz (PS)
    • 100 MHz (PL)
  • Display/Audio
    • HDMI Output
    • VGA (12-bit Color)
    • 128×32 OLED Display
    • Audio Line-in, Line-out, headphone, microphone
  • Power
    • On/Off Switch
    • 12V @ 5A AC/DC regulator
  • Software
    • ISE® WebPACK Design Software
    • License voucher for ChipScope™ Pro locked to XC7Z020