- Full support for Vivado, including tool integration, example projects and tutorials
- Breadboardable with 48-pin DIP form factor header
- Pmod connector for add-on hardware devices
- Programmable from JTAG and Quad-SPI flash
12 MHz external clock
The Digilent Cmod S7 is a small, 48-pin DIP form factor board built around a Xilinx Spartan 7 FPGA. 32 FPGA digital I/O signals, 2 FPGA analog input signals, an external power input rail, and ground are routed to 100-mil-spaced through-hole pins, making the Cmod S7 well suited for use with solderless breadboards. At just 0.7” by 3.05” inches, it can be loaded in a standard socket and used in embedded systems. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons.
- Cmod S7 Reference Manual
- Cmod S7 Schematic
- Master XDC Files
- Xilinx 7 Series FPGAs Overview
- Xilinx Spartan-7 Datasheet
- Walks through installing Vivado and Vitis, the development environments used to create hardware and software applications targeting Digilent FPGA development boards.
- Walks through using Vivado and Vitis to create a design in hardware and software that uses a processor to control buttons and LEDs.
- Walks through using Vivado to create a simple design that blinks a single LED.
- Digilent Pmod IPs can be used to control connected Pmods from baremetal software.
- It should be noted that not all Pmods are supported and that Pmod IPs are only supported in versions of Vivado 2019.1 and older.
- Analyzing DAC, ADC, and SPI Data with the Analog Discovery Studio
- Cmod S7-25 Microblaze XADC Demo
- Cmod S7-25 Out-Of-Box Demo
- Pmod I2S2 FPGA Volume Control Demo