Pmod PMON1

Buy Reference Manual Technical Support
Pmod PMON1
Power Monitor
Features
  • Monitor current draw less than 1.058 A
  • Wide range of configurable alert conditions
  • Monitor voltages from 3.16 V to 26 V
  • Configurable device address for up to nine modules in a single system
  • 2×4-pin connector with I2C interface
Electrical
Bus
I²C
Specification Version
1.0
Logic Level
3.3V
Physical
Width
1.2 in (3.05 cm)
Length
0.80 in (2.03 cm)
Design Resources
Fritzing Part
Documentation
Primary IC
AD5112, ADM1191
Reference Manual
Pmod PMON1 Reference Manual
Schematic
J1 Pinout
Pin 1 & 2
CONV
Pin 3 & 4
ALERT
J2 Pinout
Pin 1 & 2
SCL
Pin 3 & 4
SDA
Pin 5 & 6
GND
Pin 7 & 8
DVDD
J3 Pinout
Pin 1
VIN
Pin 2
GND
Pin 3
VOUT

The Digilent Pmod (Revision B) employs the Analog Devices AD5112 and ADM1191 to create a system power monitor.



Example Projects

  • No programmable logic example projects are available for the Pmod PMON1

Additional Resources

  • Specification Version 1.0: PDF
, , , , ,