Pmod OLED
Buy
Reference Manual
Technical Support
Pmod OLED
128 x 32 Pixel Monochromatic OLED Display
Features
- 128×32 pixel graphic OLED display
- Clock speeds of up to 10 MHz
- Internal display buffer
- 16 different brightness settings
- Small PCB size for flexible designs
- 12-pin Pmod connector with SPI interface
Electrical
Bus
SPI
Specification Version
1.2.0
Logic Level
3.3V
Physical
Width
1.8 in (4.57 cm)
Length
0.80 in (2.03cm)
J1 Pinout
Pin 1
CS
Pin 2
MOSI
Pin 3
NC
Pin 4
SCLK
Pin 5
GND
Pin 6
VCC
Pin 7
D/C
Pin 8
RES
Pin 9
VBATC
Pin 10
VDCC
Pin 11
GND
Pin 12
VCC
The Digilent Pmod OLED (Revision A) is an organic LED module with a 128×32 pixel display.
Example Projects
Microprocessor
- Behind You! Anti Creeper Alert System - Community Project
- Wearable Wellness System - Community Project
- Health and Security Cloud System - Community Project
- 3D road mapping autovehicle - Community Project
- Using the Pmod OLED with Arduino Uno - Application note
Programmable Logic
- Sounding Rocket Avionics with FPGA - Community Project
-
- Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
Additional Resources
- Digilent Forum user jmw created a Microblaze port of the Adafruit GFX and Adafruit SSD1306 libraries for the Arty, which likely can be made compatible with the Pmod OLED. The original Forum thread is available here.
- Specification Version 1.2.0: PDF