Pmod OD1 (Legacy)
Reference Manual
Technical Support
Pmod OD1
Open Drain Output
Features
- Two dual power N-FETs
- Comfortable drives 3.0 A of continuous current
- 4.1 A peak output current (t < 5 s)
- 20V maximum output voltage
- Four output clamp diodes
- 6-pin Pmod connector with GPIO interface
- Follows the Digilent Pmod Interface Specification Type 1
Electrical
Bus
GPIO
Specification Version
1.2.0
Logic Level
3.3V
Physical
Width
1.15 in (2.92 cm)
Length
0.80 in (2.03 cm)
J1 Pinout
Pin 1
G1
Pin 2
G2
Pin 3
G3
Pin 4
G4
Pin 5
GND
Pin 6
VCC
The Pmod OD1 is retired and no longer for sale in our store.
The Digilent Pmod OD1 (Revision A) uses open-drain MOSFETs to drive high current applications.
Example Projects
Microprocessor
- Using the Pmod OD1 with Arduino Uno - Application note
Programmable Logic
- No programmable logic example projects are available for the Pmod OD1
Additional Resources
- Specification Version 1.2.0: PDF