Pmod LED
Buy
Reference Manual
Technical Support
Pmod LED
Four High-brightness LEDs
Features
- 4 high-bright red LEDs
- Clearly visible logic level indicators
- Required driving current of < 1 mA
- 6-pin Pmod connector with GPIO interface
- Follows the Digilent Pmod Interface Specification Type 1
Electrical
Bus
GPIO
Specification Version
1.2.0
Logic Level
3.3V
Physical
Width
0.8 in (2.03 cm)
Length
0.80 in (2.03 cm)
J1 Pinout
Pin 1
LD0
Pin 2
LD1
Pin 3
LD2
Pin 4
LD3
Pin 5
GND
Pin 6
VCC
The Digilent Pmod LED (Revision A) contains 4 individual user LEDs that are driven through logic-level transistors.
Example Projects
Microprocessor
- Using the Pmod LED with Arduino Uno - Application note
Programmable Logic
-
- Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
Additional Resources
- Specification Version 1.2.0: PDF