Pmod BTN
Buy
Reference Manual
Technical Support
Pmod BTN
4 User Pushbuttons
Features
- Four momentary push-buttons
- Debounce filters
- Inverting Schmitt Triggers
- 6-pin Pmod connector with GPIO interface
- Follows the Digilent Pmod Interface Specification Type 1
Electrical
Bus
GPIO
Specification Version
1.2.0
Logic Level
3.3V
Physical
Width
1.2 in (3.05 cm)
Length
0.80 in (2.03 cm)
J1 Pinout
Pin 1
BTN0
Pin 2
BTN1
Pin 3
BTN2
Pin 4
BTN3
Pin 5
GND
Pin 6
VCC
The Digilent Pmod BTN (Revision A) gives users four momentary push-buttons for easy user inputs for the system board.
Example Projects
Microprocessor
- Simon Says with LEDs - Community Project
- Using the Pmod BTN with Arduino Uno - Application note
Programmable Logic
-
- Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
Additional Resources
- Specification Version 1.2.0: PDF