Pmod ACL
Buy
Reference Manual
Technical Support
Pmod ACL
3-Axis Digital Accelerometer
Features
- Activity/inactivity monitoring
- Single or double tap detection
- User Selectable Resolution
- Free fall detection
- Follows the Digilent Pmod Interface Specification
Key Specifications
Range
±2/4/8/16g
Electrical
Bus
I²C, SPI
Specification Version
1.3.0
Logic Level
3.3V
Physical
Width
1.0 in (2.54 cm)
Length
0.80 in (2.03 cm)
J1 Pinout
Pin 1
~CS
Pin 2
MOSI
Pin 3
MISO
Pin 4
SCLK
Pin 5
GND
Pin 6
VCC
Pin 7
INT2
Pin 8
INT1
Pin 9
NC
Pin 10
NC
Pin 11
GND
Pin 12
VCC
J2 Pinout
Pin 1/5
SCL
Pin 2/6
SDA
Pin 3/7
GND
Pin 4/8
VCC
The Digilent Pmod ACL (Rev. E) is a 3-axis digital accelerometer module powered by the Analog Devices ADXL345.
Example Projects
Microprocessor
- Auto-balancing Table - Community Project
- Building Jousting Robots - Community Project
- Health and Security Cloud System - Community Project
- Plug and Play Pmods Using LabVIEW - Community Project
- Simple Accelerometer In LabVIEW - Community Project
- Racing Ruler - Community Project
- Filtering Accelerometer Noise In labVIEW - Community Project
- Plotting 2D and 3D g-force vectors in LabVIEW - Community Project
- Stationary Accelerometer Tilt Sensor - Community Project
- Using the Pmod ACL with Arduino Uno - Application note
Programmable Logic
- Sounding Rocket Avionics with FPGA - Community Project
-
- Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
Additional Resources
- Specification Version 1.2.0: PDF