Pmod HAT Adapter

Buy Reference Manual Technical Support
Pmod HAT Adapter
Pmod Expansion for Raspberry Pi
Features
  • Compatible with Full Line of Digilent Pmod Peripheral Modules
  • Three 2×6 Pmod Host Ports
  • Supports SPI, UART, I2C, and GPIO
  • Follows Raspberry Pi HAT Specification
Electrical
Power
Raspberry Pi / External 5V jack
Pmod Logic Level
3V3
HAT Logic Level
3V3
Physical
Width
65 mm (2.56 in)
Length
56.5 mm (2.22 in)
Product Compliance
HTC
8471801000
ECCN
EAR99

The Pmod HAT Adapter makes it easy to connect Digilent Pmods to a Raspberry Pi. It supports plug-and-play functionality, only requiring that the host Raspberry Pi be booted with the Pmod HAT attached. The Pmod HAT has three 2×6 Digilent Pmod ports and provides access to additional I/O available via the Raspberry Pi 40 pin GPIO connector. Designed in collaboration with RS Components, users can take advantage of example Python libraries and demo tutorials hosted on DesignSpark. See the Software Support section below for more info.



Documentation

Additional Resources