Pmod OC1
Buy
Reference Manual
Technical Support
Pmod OC1
Open Collector Output
Features
Four 100mA (200mA max) transistors
Four output clamp diodes
40V voltage threshold
6-pin Pmod port with
GPIO
interface
Follows the Digilent
Pmod Interface Specification
Type 1
Electrical
Bus
GPIO
Specification Version
1.2.0
Logic Level
3.3V
Physical
Width
1.0 in (2.54 cm)
Length
0.80 in (2.03 cm)
Design Resources
Fritzing Part
Fritzing part
Documentation
Primary IC
MMBT3904
Reference Manual
Pmod OC1 Reference Manual
Schematic
Schematic
J1 Pinout
Pin 1
P1
Pin 2
P2
Pin 3
P3
Pin 4
P4
Pin 5
GND
Pin 6
VCC
The Digilent Pmod OC1 (Revision C) uses open-collector BJTs to drive high current applications.
Example Projects
Microprocessor
Using the Pmod OC1 with Arduino Uno
- Application note
Programmable Logic
No programmable logic example projects are available for the Pmod NIC100
Reference Projects
Reference Design using the X-Board
Additional Resources
Specification Version 1.2.0:
PDF
pmod
,
pmod-start
,
pmod-gpio
,
pmodoc1
,
open-collector
,
bjts
,
resource-center