NOTE: This project is currently under construction.
Not Used | Used | |
---|---|---|
16 user switches | X | |
16 user LEDs | X | |
Two tri-color LEDs | X | |
5 User Push Buttons | X | |
Two 4-digit 7-segment displays | X | |
4 Pmod ports | X | |
Pmod for XADC signals | X | |
12-bit VGA output | X | |
USB-UART Bridge | X | |
Serial Flash for Application Data | X | |
USB HID Host With Mouse | X | |
USB HID Host With Keyboard | X | |
Micro SD card connector | X | |
PWM audio output | X | |
PDM microphone | X | |
3-axis accelerometer | X | |
128MiB DDR2 | X | |
Temperature sensor | X | |
10/100 Ethernet PHY | X |
The Nexys4DDR gets PDM data from the built-in microphone, then digitally filters data for decimation and resolution (16 bit, 48KSPS). Then reverberates the audio data and outputs it to the built-in Audio Out, stores a frame of 1024 samples and shows it on a VGA display (640×480, 60Hz). then the demo computes the Fast Fournier Transform (FFT) of the stored data (512 bins x 46.875 Hz = 0…24KHz). The demo shows the first 80 FFT bins on the VGA display (80 bins x 46.875 Hz = 0…3.75KHz) and displays the first 30 FFT bins on an WS2812 LED string (30 bins x 46.875 Hz = 0…1.4KHz),
Spectral Sources Demo – ZIP
1.1) Download the zip file linked in the download section and unzip it in the location of your choosing.
1.2) Generate the Nexys4DDRSectralSources project in the “proj” folder by following this guide before continuing: How to Generate a Project from Digilent's Github
2.1) Click Generate Bitstream on the left hand menu towards the bottom. Vivado will run through both Run Synthesis and Run Implementation before it generates the bitstream automatically.
Note: If you want, you can click each step by itself in the order of Run Synthesis, Run Implementation and then Generate Bitstream.
3.2) Click program to load the project onto your Nexys4-DDR.
This portion will help you run the demo and observe all its features.