Introductory level demonstration project for the Arty's LEDs, switches, buttons, and USB-UART bridge.
Not Used | Used | |
---|---|---|
4 User Switches | X | |
4 User LEDs | X | |
4 User RGB LEDSs | X | |
4 User Push Buttons | X | |
4 Pmod Connectors | X | |
XADC Analog Input | X | |
USB-UART Bridge | X | |
Serial Flash for Application Data | X |
Arty GPIO Project Support Repository – ZIP Archive GIT Repo
1.) Follow the Using Digilent Github Demo Projects Tutorial. This is an HDL design project, and as such does not support Vivado SDK, select the tutorial options appropriate for a Vivado-only design. When prompted to return…
2.) To see the UART communication channel, open a terminal program on your computer set to 9600 baud, 8 data bits, no parity bit and 1 stop bit. Choose the COM port that your ARTY is connected to (To determine what COM port your Arty is connected to, open up Device Manager on your machine. Under Ports (COM & LPT) you should see something like 'USB Serial Port (COMX)' where the X is the number of the connected COM port). Then return to the Github Project Tutorial to finish programming and running the demo.
To run all the features of this demo, you will only need the Arty board.